🎉 The Biggest Promotion of the Year: Rent Long-term Forklift and Get TV LG 43-Inch ! 🎉

新プロモーションのご案内！ 下記ギフトを準備してお待ちしております！ 👉 💥 LG-43インチテレビ 💥 此のプロモーションは数量制限が無くベトナム全土を対象としております！ 👉プロモーション期間：2024年末日 👉プロモーション対象：2年以上のフォークリフトレンタルのご契約が対象となります。 是非この機会をお見逃しなく！ ご相談やお見積りについては、今すぐお問い合わせください。 😊     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Forklift rental service in Can Tho (Toyota, Mitsubishi, Doosan …)

Forklift (including Reach Truck) is very important for manufacturing, transportation, and product management in those large Industrial Zones in Can Tho province. Such as Tra Noc 1, Tra Noc 2, Hung Phu, Thot Not, O Mon, Cai Rang, Co Do, Phong Dien… Forklift Rental Service is a flexible and efficient solution for factories in these areas. This article will introduce NISHIO Forklift rental service in Can Tho to those who may be concerned. NISHIO Forklifts’ rental lineup includes the famous brands: TOYOTA, Mitsubishi, CAT, Clark, Enforcer, Doosan, TCM, and Nichiyu. Maximum capacity: 1.5 ton Maximum lifting height: 5 m Maximum capacity: 1.5 ton or 2.5 ton Maximum lifting height: 1.5 m or 2.4 m Forklift type: Full-free lift / normal Maximum capacity: 2.5 ton or 3 ton Maximum lifting height: 3 m – 4 m – 4.7 m Forklift type: Full-free lift / normal Maximum capacity: 800kg – 1.4 ton – 1.5 ton or 1.8 ton Maximum lifting height: 3 m – 5 m or 6 m Forklift type: Full-free lift / normal Maximum capacity: 2 ton or 3 ton Maximum lifting height: 4.5 m or 4.7 m Forklift type: Full-free lift / normal Maximum capacity: 2 ton – 2.5 ton – 3 ton – 4 ton – 4.5 ton or 6 ton Maximum lifting height: 3 m – 4 m – 4.3 m hoặc 4.5 m Forklift type: Full-free lift / normal Maximum capacity: 1.5 ton Maximum lifting height: 4 m Forklift type: Full-free lift / normal Maximum capacity: 1.5 ton or 2 ton Maximum lifting height: 4.3 m hoặc 4.7 m Forklift type: Full-free lift / normal Maximum capacity: 2.5 ton or 4 ton Maximum lifting height: 3 m hoặc 5 m Forklift type: Full-free lift / normal Maximum capacity: 2 ton or 2.5 ton Maximum lifting height: 3 m, 6m or 6.5 m Forklift type: Full-free lift / normal Maximum capacity: 2.5 ton Maximum lifting height: 3.3 m or 4.8 m Forklift type: Full-free lift / normal Maximum capacity: 2.5 ton or 4.5 ton Maximum lifting height: 3.3 m, 4.3 m or 4.8m Forklift type: Full-free lift / normal Maximum capacity: 1.5 ton Maximum lifting height: 3 m or 4 m Forklift type: Full-free lift / normal Maximum capacity: 4 ton, 6 ton or 10 ton Maximum lifting height: 3 m or 5 m Forklift type: Full-free lift / normal Maximum capacity: 1.5 ton or 1.8 ton Maximum lifting height: 3 m or 5 m Forklift type: Full-free lift / normal Maximum capacity: 1.5 ton or 2 ton Maximum lifting height: 3 m or 4.7 m Forklift type: Full-free lift / normal Maximum capacity: 1.8 ton or 3 ton Maximum lifting height: 3 m or 4.5 m Forklift type: Full-free lift / normal Maximum capacity: 1.6 ton Maximum lifting height: 4.5 m Maximum capacity: 2 ton Maximum lifting height: 125 cm Maximum capacity: 1.8 ton Maximum lifting height: 200 cm Maximum capacity: 3 ton or 3.5 ton Maximum lifting height: 3 m Forklift type: Full-free lift / normal Convenient location: It is very convenient to transport forklifts from our Southside office (Dong Nai) to nearby areas, which is beneficial for cost savings. Various forklift lineup: As a business partner of many famous brands worldwide in forklift manufacturing fields such as Toyota, Mitsubishi, Clark, Enforcer… We provide many types of forklifts including diesel forklifts, battery forklifts,… Professional team: Following Japanese training standards, we have a professional technician team with a high level of skills and a deep understanding of forklifts. High maintenance quality: We supply periodic maintenance as well as a high level of safety and quality assurance to make sure that our forklift always operates as well as possible. Constantly updating: NISHIO usually updates the newest models and technology of forklifts, providing customers with advanced and optimal solutions. Long-term renting promotion: To get the most value, we recommend long-term rental for our customers that reduces initial investment costs compared to buying new. Fully documents: NISHIO prepares full registration, inspection documents, and others for legal assurance of clients The rental price of the forklift will based on forklift condition, manufacture year, rental time, customer’s location, forklift attachments, and purpose of using… Therefore, you should contact us to exchange more information to get the most accurate quotation.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Lifting equipment (Forklift, boom lift, scissor lift) for rent in Thang Long Industrial Park Hanoi

Forklift and Aerial Work Platform (AWP: Boom Lift, Scissor Lift, Personal Lift…) have an important role in production , transportation and product management for the Industrial Parks as Thang Long IP Hanoi. While the Forklift is an necessary equipment for all manufacture factories & logistic companies, AWP is used for the purposes as system installation, facility renovation. maintenance, cleaning, painting or even cutting trees… Renting equipment as Forklift and AWP is becoming a trend and a solution for the businesses in Thang Long Industrial Park. In this article, we will introduce about NISHIO rental service.  Saving cost: Instead of spending a big budget on buying new brand Forklifts, rental service can help you to save the investing fee and keeping your financial for other activities.  Optimize productivity: Equipment is always in good working condition, ensuring efficient and safe lifting of goods. No worries about maintenance and repairs: Equipment rental service includes maintenance and repairs, helping you focus on your core business. Contractors at construction sites or maintenance contractors inside factories in Thang Long Industrial Park can also contact NISHIO to rent short-term Forklifts and AWPs. There are so many rental equipment companies around Thang Long IP. To find out a high quality service, you should take your attention in these below things: Reputation: If you use suppliers that do not have clear qualifications or lack documents about the origin of machine, it will cause many problems. Machinery quality: Of course, this is what you care about most when looking for a machine and equipment. Old and weak one will easily cause accidents and malfunctions, which will take time to process, thereby affecting work progress and production efficiency. Mechanic team: Mechanics who are well-trained and knowledgeable about the specialized knowledge from the rental service provider will help you save a lot of time by assisting in answering questions and repairing machinery in a timely manner. Forklift and Reach Truck: Toyota, Mitsubishi, Doosan, Clark, Enforcer…. Rate capacity from 1.5 ton to 10 ton Max. Lifting height from 3 meter to 4.5 meter Diesel and Battery type Rental term from 1 day Click here for more information  Stand-on Electric Hand Pallet Electric Hand Pallet Hand Pallet Hand lifter brand Genie Brands: Genie, JLG, Skyjack Scissor Lift (electric): Max. Working height from 7.79 meter to 15.95 meter Scissor Lift (engine): Max. Working height from 18.15 meter  Telescopic Boom Lift (engine): Max. Working height from 21.81 meter to 48.33 meter Telescopic Trax Boom Lift (engine, track): Max. Working height 21.81 meter Articulated Boom Lift (engine): Max. Working height from 12.54 meter to 43.15 meter Articulated Boom Lift (electric): Max. Working height from 12 meter to 20.16 meter Personal Lift (electric): Max. Working height from 5.65 to 14.3 meter Please refer more information from HERE We are a 100% Japanese company with more than 60 years of experience in the international market. We have many branches in different countries. We are ranked 10th among the biggest rental equipment companies in the world and number one in Vietnam. Thang Long Industrial Park was also built in cooperation between Vietnam and Japan, so if you work with NISHIO you will be supported by both countries’ staff. NISHIO is a direct partner of famous brands such as Genie, Doosan, Toyota,… You can rest assured when using new, high quality, genuine equipment with little damage. (Refer to the article: The annual AWP technical training of GENIE at NISHIO｜NISHIO RENT ALL VIETNAM CO., LTD.) We have clear certificates, and other relevant documents if requested. NISHIO’s mechanic team is well-trained and always prepares a clear monthly equipment maintenance checklist to customers. Rental price is probably the primary information that you search most. However, the equipment rental price will include many things such as rental term, machine model, accessories, location… Therefore, please send us more information to receive an accurate quote.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

[NEW] Lithium-Ion Battery Forklift is ready for rent in Vietnam!

This Battery Forklift is designed with a battery system of Lithium-Ion cells which makes it sturdier, longer-life, and faster charging compared with the Lead Acid Battery system.  Model FBA30-JZ Load capacity (kg) 2,700 (When loading center is 600mm)* Overall length (mm) 3,557 Overall width (mm) 1,235 Overall height (mm) 2,160 Fork length (mm) 1,070 Max. Lifting height (mm) 4,500 Turning radius (mm) 4,195 Total weight (kg) 4,710 *LOAD CENTER: The center point that supports the load when the forklift lifts a load. When lifting an object of a predetermined weight during the design phase, the forklift raises the load along the load center to align with the object’s center of gravity. If the load center is not appropriate, there is a possibility of imbalanced load or compromised stability of the forklift. Lithium-ion and Lead-acid are both popular types of batteries today. As their name suggests, Lithium-ion batteries contain cells manufactured using lithium Iron Phosphate while Lead-acid batteries contain cells manufactured using lead. Currently, Lithium Battery is a kind of rechargeable battery that is widely used in mobile devices such as phones, laptops, cameras, and electric vehicles. Forklift manufacturing technology is no exception, many manufacturers are now starting to use Lithium-Ion batteries. Because of the outstanding advantages during use, Lithium batteries are expected to replace lead-acid batteries soon, contributing to environmental protection.  Enforcer Battery Pack System includes: Battery Module Heat Management BMS (Battery Management System) Electric System Case Structure Below are some of the advantages of Enforcer Lithium-Ion battery when compared to Lead-acid battery Quick charging: 2 hours full charge, economic use of each break. Long working: 4000 charging cycles, capacity retention greater than 80%. (If you charge 1time/day you can use it for 10 years)  Maintenance-free: Battery does not require manual maintenance. Sturdy: The module uses an aluminum alloy frame which is lightweight and with excellent heat dissipation. Safe and effective: Charging efficiency as high as 98%, thermal runaway temperature 600ºC or above. Adapted to low temperatures: Comes standard with an electrical heating feature, ensuring normal operation in low temperatures. Green and clean: Pollution-free, zero emissions. One of the concerns when using Lithium Batteries is the phenomenon of “Thermal Runaway”. This is a phenomenon in which a lithium-ion battery cell enters a state of automatic and uncontrolled heating. Overheating the battery cell can lead to a chemical reaction and cause a fire or explosion. However, this phenomenon is not a coincidence. Users can reduce this potential risk by improving the working environment of the Forklift (ideally between 5 – 20 ° C), staying away from flammable materials, and using a Battery Management System (BMS).  As we mentioned above, Enforcer’s battery system has also been improved and upgraded to avoid the risks of Lithium-Ion Battery Thermal runaway temperature. Therefore, feel secure when using Enforcer Electric Forklifts, as long as you follow the recommended basic safety measures. We hope you will consider and choose to experience this new Enforcer Forklift model. If you have any questions about NISHIO’s long-term Forklift Rental Service, you can refer to it here. The rental price for Forklift depends on the rental term, delivery location, etc. Therefore, to receive an accurate quote, please contact NISHIO via Hotline or leave your information, we will quickly respond to all your inquiries.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

CHRISTMAS PROMOTION for DIESEL FORKLIFT!

  Dear valued customers, The Christmas atmosphere is coming everywhere, bringing with it so much joy and happiness. Christmas Gifts are definitely an indispensable thing on this special occasion! Giving each other meaningful gifts means giving love and expressing emotions. Therefore, we also want to send you our best wishes, along with a gift: PROMOTION CAMPAIGN SPECIAL DISCOUNT on FORKLIFT (DIESEL) RENTAL orders for all businesses in Vietnam!   This promotion runs until December 31st. Please quickly send your information and quote request to us!     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Forklift for rent in Dong Nai, Binh Duong and surrounding areas

Our company has established and developed the Southeast branch in Bien Hoa City, Dong Nai for few years ago. This is a convenient location for easy transportation, providing forklift rental services on the same day for surrounding customers. Dong Nai and Binh Duong provinces are located in the key economic region of the Southeast, and are one of the biggest Industrial Zones in Vietnam. Therefore, the demand for using Forklifts for production and transportation activities here is extremely large. However, even though most businesses invest in buying forklifts, they cannot avoid the arising issues of vehicles lacking when the workload increases or the Forklifts encounter problems. Capturing the market demand, we currently have many NEW Forklift models from 1-10 tons for short-term and long-term rental in Dong Nai, Binh Duong, and neighboring provinces. NISHIO Dong Nai branch address: No. 990 Xa Lo Ha Noi, Neighborhood 2, Binh Da Ward, Bien Hoa City, Dong Nai. Phone: 025-1368-3224 Photo: NISHIO’s Diesel Forklift in a factory Video: Battery Forklift with Rotator attachment Enforcer Lithium-Ion Batery Forklift Photo: Our customer is checking Reach Truck LIÊN HỆ NGAY NISHIO is near AMATA Industrial Park, Bien Hoa, Dong Nai: Prompt delivery (Easy to transport equipment to your factory in the same day that we receive your inquiry.) We supply many types of Forklift and attachment. Customers can easily choose suitable models. We are a partner of famous brand such as Toyota, Mitsubishi, Clark, Enforcer… Our staff can work in English, Japanese, Korean and Vietnamese. NISHIO Mechanic team is trained with a high Japanese standard. We are the 12th ranked company in the world for equipment rental. NISHIO’s machinery and equipment are always in new condition, ensuring safety and quality. Continuously update new models every year. It is especially recommended that you rent a forklift for a long time: Long-term rental instead of buying a new Forklift will help reduce initial investment costs. Reduce repair costs by our monthly maintenance service. Provide Forklift attachments according to customer requirements. Periodic maintenance, with records and reports. We will prepare registration documents and other documents clearly. Photo: One customer in Dong Nai is very satisfied with NISHIO’s service. NISHIO Local suppliers Equipment High quality (Brand new 100%, directly imported from famous brands). Low quality (Old models, used one) Maintenance Periodic maintenance When machine met troubles. Documentation and reports We will arrange documents and reports clearly as your request. Unclear, lack of documents,.. Forklift broken Quickly repair and replace it. Don’t have enough spare parts and forklift to replace. Mechanic’s skill High-skilled mechanic. They are all trained and have certificates. Almost learn by themselves. Some suppliers will offer you a surprisingly cheap and attractive price. You think you can save some money, but forget that if the forklift does not meet the standards, there are many problems during use, there is not a full set of equipment documents… these things will consume quite a lot of time and cost of the business. Then, not only can it not guarantee the quality of work, interrupt the production process, but it can also bring many other risks such as loss of occupational safety… Therefore, you should try to choose a reputable rental Forklift supplier in the market. Forklift renting price depends on many factors such as: Forklift’s condition, manufacter year, rental term, location, Forklift attachments, using purpose… Therefore, you should contact the Forklift rental companies and exchange more information to get the most accurate quotation! Photo: One NISHIO Mechanic is doing Forklift maintenance If you need more detailed information about NISHIO’s forklift rental service in Dong Nai, Binh Duong and southern provinces, please contact the Hotline number below or leave your contact information, we will quickly answer all questions and send the quotation file as soon as possible.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Reach Truck rental service in Vietnam

  Reach Trucks offer several advantages over conventional forklifts, such as: Higher lifting capacity: Reach Trucks can lift loads up to 12 meters high, which is much higher than most forklifts. This allows for more efficient use of vertical space and storage density. Better maneuverability: Reach Trucks have a smaller turning radius and can navigate through narrow aisles with ease. They also have a tilting mast and a telescopic fork that can extend and retract to reach the desired rack position. This reduces the need for excessive driving and repositioning, which saves time and energy. Enhanced safety: Reach Trucks have a low center of gravity and a stable base that prevent them from tipping over. They also have a driver’s cabin that is enclosed and elevated, which provides better visibility and protection for the operator. Moreover, reach trucks have various safety features such as sensors, alarms, cameras, and lights that warn the operator and other workers of potential hazards. Reach trucks come in different models and configurations, but they generally share some common features, such as: Reach mast: Reach trucks are equipped with a telescopic mast that allows vertical lifting and horizontal extension/retraction of the forks or load carriage. This feature enables them to reach deep into racking systems. Pantograph mechanism (To reach in/out, only has in some special models): Some special models of Reach trucks have a pantograph mechanism that consists of a scissor-like device that connects the fork carriage to the mast. The pantograph mechanism enables the fork to extend and retract without moving the mast or the truck body. This allows for more precise and flexible load placement and retrieval. Side stance: Reach trucks have a side stance design that allows the operator to face the direction of travel. This improves the operator’s comfort and visibility, as well as the accuracy and speed of load handling. Load backrest: Reach trucks have a load backrest that supports the load and prevents it from falling backward. The load backrest can be adjusted to accommodate different load sizes and shapes. Electric power: Reach trucks are powered by batteries that can be recharged at charging stations. Electric power makes them eco-friendly, quiet, and low-maintenance. There are two main types of reach trucks: Stand-on reach trucks and Sit-on reach trucks. Stand-on Reach Trucks are designed with a platform for the operator to stand on while operating the truck. This design allows for greater visibility and agility, making them suitable for narrow aisles and confined spaces. They are commonly used in warehouses and distribution centers where maneuverability is important. Stand-up reach trucks typically have a lower lifting capacity compared to sit-down reach trucks. Sit-on Reach Trucks as the name suggests, are equipped with a seat for the operator to sit on. They provide a more comfortable operating position and are typically used for applications that involve higher lifting capacities and taller rack heights. Sit-down reach trucks often have a higher lifting capacity compared to stand-up reach trucks. The lifting capacity of both stand-up reach trucks and sit-down reach trucks can vary depending on the specific model and manufacturer. It is important to consult the manufacturer’s specifications or contact a dealer to determine the exact lifting capacity of a particular reach truck model. Before choosing a Reach Truck, you should consider some factors such as: The size and layout of your warehouse or facility The type and size of your loads The height and width of your storage racks The width and length of your aisles The frequency and duration of your operations The budget and availability of your resources You should also compare different models and brands of Reach Trucks based on their specifications, features, performance, reliability, safety, warranty, service, and price. Once you have chosen a Reach Truck, you should follow some tips on how to operate it safely and effectively, such as: Read the manual and follow the instructions Inspect the truck before each use Wear appropriate personal protective equipment Check the battery level and charge it when needed Adjust the seat, steering wheel, mirrors, and controls to your preference Drive slowly and carefully Keep a safe distance from other vehicles, workers, racks, walls, doors, etc. Use the horn, lights, signals, cameras, etc. If you are looking for a way to rent a Reach Truck in Vietnam, you might be wondering what are the benefits, options, and costs of this service. In this blog post, we will answer some of the common questions that customers have when they want to rent a reach truck in Vietnam. Renting a Reach Truck in Vietnam can help you save your budget, as you do not need to invest in buying a new or used machine that might require maintenance and repair costs. Renting a Reach Truck also gives you more flexibility, as you can choose the rental term that suits your needs, whether it is daily, monthly, or yearly. You can also access a variety of models and capacities of reach trucks, depending on your warehouse requirements and load sizes. Another benefit of renting a Reach Truck in Vietnam is that you can enjoy free monthly maintenance service from the rental company, as well as professional mechanics who can solve any issues with the machine. If the reach truck has any problems that cannot be fixed on-site, the rental company will provide you with a free replacement machine to ensure your operations are not interrupted. There are many rental companies that offer Reach Truck rental services in Vietnam, but not all of them are reliable and reputable. You should look for a rental company that has a large inventory of Reach Trucks, a wide network of branches and warehouses near your location, and a good reputation for customer service and quality. One of the rental companies that meet these criteria is NISHIO RENT ALL VIETNAM CO., LTD. (NRAV), which is a subsidiary of NISHIO RENT ALL CO., LTD., one of the largest rental companies in Japan. NRAV has 5 branches in Vietnam (Ha Noi, Hai Phong, Da Nang, Quang Nam, Dong Nai). We offer daily, monthly, and yearly rental services for reach trucks and forklifts (engine and electric) in Ha Noi, Ho Chi Minh, Thu Duc, Binh Duong, Quang Nam, and other areas in Vietnam. NRAV has a fleet of high-quality reach trucks and forklifts that are regularly maintained and replaced after a few years. Our mechanic team is trained by the global standard and is very kind and willing to support customers. We also have mechanics who can stay in the big projects for more convenience when customers need our support. The cost of renting a reach truck in Vietnam depends on several factors, such as the model, capacity, lifting height, rental term, and location of the rental company. Generally speaking, the longer the rental term, the lower the rental fee per day or per month. To get an accurate quotation for renting a reach truck in Vietnam, you should contact the rental company directly and provide them with your specific requirements and preferences. NISHIO can give you a detailed proposal that includes the rental fee, delivery fee, maintenance fee, insurance fee, and other terms and conditions. Renting a reach truck in Vietnam can be a smart and economical choice for your warehouse operations if you want to save money, enjoy flexibility, and access high-quality machines and services. However, you should be careful when choosing a rental company and make sure they are trustworthy and professional. NISHIO RENT ALL VIETNAM CO., LTD. is one of the leading rental companies in Vietnam that offers reach truck and forklift rental services with competitive prices and excellent customer support. If you are interested in renting a reach truck from NRAV or want to know more about our products and services, please contact us via phone 02513683224 or leave your inquiry here.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Choosing Forklift rental service in Vietnam

Forklift has a big role in the manufacturing line, internal/external logistics… You must care about some features when using a forklift. Such as: The quality of fork shoes, wheels, brake, battery… Operator’s skill: They must have a license and forklift operation certificate. Checking all the forklift component statuses before operating. Checking the environment and weather conditions. Does the area using the forklift have enough space to operate it? Whether the weight of goods suitable for the capacity of the forklift? Whether the height and width of the container and packages are suitable with the fork.Its dimensions and mast type? What kind of mast type and how long mm of the fork can you use? Forklift maintenance regularly by the high-skill mechanic. As you know forklifts usually be used in warehouses, factories, construction sites, and residential areas… Therefore, if there is an accident with the forklift, it will lead to many extremely serious consequences. Not only for the forklift itself and the driver but also for other workers and your products. Comprehending operation skills, safety guidance, maintenance, and checking periodically… are the things that forklift users should have. It’s quite basic rules. Even so, it seems not all companies are confident about it. Moreover, investing in a brand-new forklift requires a big budget, people tend to not have regular maintenance to save the maintenance cost of forklifts which can lead to major failures and serious accidents. So how can we save the budget optimally? How to safely use the forklift for a long time? Renting a forklift with maintenance service and operating instructions is a wise choice. You can avoid a sudden huge amount of repair fee by having regular maintenance. In the rental service, the monthly rental fee already includes a maintenance fee and spare parts fee so you can save irregular costs and time to manage it. (NISHIO service case) Nowadays, many companies are choosing long-term and short-term rental forklift services instead of buying new-brand or used forklifts. You can see the below comparison chart for the major reason. Purchase Forklift Long term Forklift rental(NRAV) Big initial investment cost (purchase fee, inspection fee…) 100% advance payment Only need to pay the monthly rental fee Further discount if the rental period is extended. Repair, maintenance, and replacement spare parts costs are incurred annually. Need to arrange maintenance each time by yourself All are included in the rental fee. (Regular maintenance fee, spare parts fee) => Cost is increasing over time while the forklift is getting older. => Hard to make a yearly budget plan => The person in charge needs to spend more time taking care of forklifts. => The fixed rental fee will help to save your money.(free of charge the repair fee for breakdowns caused by forklift) => Easy to make a yearly budget plan. => Can minimize the person in charge’s workload     The benefits that forklift rental services bring are very clear. You can experience forklift rental for a few months before deciding to sign a long-term rental contract. If you have never used a forklift rental service, you should look for an experienced and reputable machinery rental company in the market. In Vietnam, we know that there are many forklift rental companies. However, choosing and sending your trust as well as a big amount of investment will surely make you think carefully. The most recommended way is to ask your friends or staff to introduce a reliable supplier. If you don’t have friend or staff who knows about forklift rental supplier you can check supplier website and information, but need to be more careful. It is impossible not to think about the case where the lessor does not ensure the safety of the forklift, the forklift outside looks brand new but has heavy damage internally such as the engine, starter, etc. so you’d better check the forklift’s quality by your own eyes. Also in many cases, these suppliers do not have good maintenance skills and hard to check on the first visit. With more than 10 years of experience in rental machinery and equipment in Vietnam and more than 60 years in the global market, also we are a direct partner of many famous Forklift/Reach truck brands from Japan, Korea, Australia,… NISHIO can guarantee the quality of Forklift/Reach truck rental and the service to customers. Step 1: Customer sends inquiry and information Step 2: NISHIO salesman advises and sends quotation to the customer (Customer can visit our yard and check the machine) Step 3: Customer confirms the quotation and sends the PO to NISHIO Step 4: NISHIO sends the contract for both parties to discuss, sign, and stamp. Step 5: For new customers – Applied 1 month and transportation fee advance payment. For existing customers – Applied end-month payment Step 6: NISHIO delivers machines to the customer site and then operates instructions. Customers check the machine and sign in the receipt sheet. Please contact us if you want to rent a diesel forklift, electric forklift, or reach truck (1.5 ton/2.5 ton/3 ton…) in Vietnam.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Nishio Diesel Forklift rental now is on Holiday Sale Promotion!

In order to thank the customers who have supported Nishio during the past 1 year, and as a New Year’s gift for all NISHIO customers, we are starting a special Forklift Rental Promotion Campaign. Specific contents are as follows: The forklift rental price is only from 1x,xxx/month. First come first service. The rental price includes maintenance costs. Limited quantity, only before the Lunar New Year 2023!! Contact us immediately via Hotline 02862651226 or 0964675805 or leave your information here: https://www.nishio.com.vn/contact/ Hope to have the opportunity to cooperate with you to promise a prosperous 2023!     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Forklift and reach truck rental service in Ha Noi, Ho Chi Minh, and other industrial areas in Vietnam

Currently, forklift and reach truck rental services are being increasingly interested and developed in Vietnam, but along with it are concerns from customers about the quality of machine as well as the reputation of the rental business. So how to find reputable forklift and reach truck rental businesses? Are you new to the forklift rental market and have more questions to ask? Want to rent a good quality forklift? Let’s raise your knowledge about forklift and reach truck rental service through the article below. Save your budget Free monthly maintenance service Professional mechanics can solve the issues of machine Free changing machine if it has any problems from rental company NISHIO has 5 branches in Vietnam (Ha Noi, Hai Phong, Da Nang, Quang Nam, HCM). Our warehouse and office all are near the Industrial Zone and Construction projects which is very convenient for transportation and maintenance services. NISHIO Forklift and Reach Truck are always in a good condition with regular maintenance and replaced after a few years. Our Mechanic team is trained by the global standard, very kind and willing to support customers. Specially, we have the mechanics who can stay in the big project for more convenience when customers need us. NISHIO is one of the few companies which can supply the rental service for only one day or one month while most of the other rental companies require customers to sign the contract for two or three months (besides, you need to pay a deposit for them). With NISHIO rental service, you do not need to worry when your forklift or reach truck has a heavy problem and needs to be replaced in a few days.   As we mention in the article “Compare between the long-term rental and new purchase Forklift”, it is better to rent a Forklift or Reach Truck if you are an Industrial customer. Factories must use these machines in big quantities so making a long-term contract is a great choice. Not the same as a construction site, the factory needs to use the forklift and reach truck with a high frequency for moving goods. It is related to the factory line product. Therefore, when the forklift meets an issue, they need to be repaired or replaced soon. When you use NISHIO rental service, our mechanic will be present at your site as soon as possible. Renting a Forklift or Reach Truck is a bright decision, so why don’t you choose our long-term rental service to get a more attractive promotion? Step 1: Customer sends inquiry and information Step 2: NISHIO salesman advices and sends quotation to customer (Customer can visit our yard and check the machine) Step 3: Customer confirms the quotation and sends the PO to NISHIO Step 4: NISHIO sent the contract, both parties discussed it, signed it, and stamped it. Step 5: For new customers – Applied 1 month and transportation fee advance payment. For existing customers – Applied end-month payment Step 6: NISHIO delivers machines to the customer site and then operates instruction. Customers check the machine and sign in the receipt sheet. Recently, it appears many rental and selling equipment companies with a very low price. But do not hurry and choose that service just because of the price. You can not make sure that these machines have enough standard quality or not, because they usually are very old machines which come from oversea. In your using machine time, you can meet the problems that can not be solved and repaired. You will feel regret by the damages that machine brings to your business, it will waste your time and money more than you thought. If you want to rent a Forklift or Reach truck (even other equipment), please contact NISHIO.       Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Top signs and symptoms when your forklift requires maintenance or repair

Forklifts are the key factors of the equipment using indoor/outdoor operation such as construction site, logistics, and warehousing industries. They have a big role in cutting out extra time, reducing costs, and offering a safer work platform for your workers. In fact, proper Forklift Maintenance can help avoid the extra financial burden and increase productivity. However, in order to keep your forklifts in good condition, you need to know when you need to have maintenance/ repair… Regular inspection can obviously help eliminate most of the issues at its root. However, what about those problems that have already surfaced? Are your operators can find those problem. Below is a Checklist to find the signs of your forklift when it requires repair. Inspection every month is a good way to understand the condition of your machines. But even if your forklift seems in good condition, it could be damaged inside. To that end, operators should know what they need to pay attention to in order to avoid further damage to forklifts. Our forklift checklist will help sort that out. Check out these signs so that you don’t miss out on subtle cues indicating a need for forklift repairs. Damage in forklift chains can become the cause of machine failure. In fact, the forklift may halt in the middle of a job resulting in increased downtime and project costs. Forklift chains usually don’t require replacing as long as they are well lubricated with oil. However, any sign of corrosion, rust, kinking, or overly extended chain indicates the need for repairs or replacements. Missing out on these signs can end up costing you heavily as chains are an important component of the internal functioning of a forklift. It should also be noted that not getting the chain replaced on time can also damage the load you’re carrying. This is one of the most important aspects to include in your forklift checklist. Look out for leaks within or beneath the forklift. If the oil is leaking, there’s a good chance it will be visible around the job site. Oil leaking is a sign that less oil is available to lubricate the different moving parts of the machinery. Thus, leading to increased friction and grinding of gears, which interrupts the smooth functioning of the forklift.  Most of the operators make the mistake of adding in more oil or just wiping it, which is, obviously, not an exact solution. Repairing the root cause of the oil leak is important. Otherwise, it may lead to hydraulic system failure. Since the battery forklift has no exhausted gas it’s environmentally friendly and suitable to use for indoor operations. The battery is easy to take care and no need to refill the fuel but it’s time to check carefully the battery condition if you find that it’s not charged as usual. To assess the condition, we can compare the current charging time with previous records. Generally speaking, it’s recommended to charge the battery when 20 – 30% remaining. Using the right charger and filling the battery fluid at the right level can also help keep the battery in good condition for a long period of time. Forks are clearly essential to forklift operation. It seems quite tough and seems not broken easily but if you are not taking care of their condition it can be an economic as well as safety hazard. On the financial front, damaged forks are may not be able to hold the weight and damage the goods in transit. Moreover, errors in loading and unloading goods can affect the safety of on-site workers. It’s natural for forks to get damaged with time depending on the load and the amount of operation. Because of these reasons, you should take immediate action when you notice surface cracks, bents, or misalignment of the forks. Additionally, wear and tear because of long-term use also reduce the fork capacity. Visually check the condition of the fork on a regular basis, and if there is a problem take immediate actions. Keep these basic tips in your mind and don’t forget regular checks to avoid financial damage and to ensure your safety. It takes some time but small steps prevent major accidents. Except for the above-mentioned common issues, kindly check the below list. It helps you to maintain the forklift in good condition and for longer life. ・High emission of white or black smoke from the exhaust system, carrying a strong odor ➡ Time to check the filter/exhausting air system. ・Rough forklift operation cause to damage the tire➡ Check driving technic of the operator. ・Seat get high temperature ➡Might have engine/battery trouble. ・Slow mechanical response while lifting or using attachments ➡Might have trouble with electric system/ hydraulic system. ・Wear and damage in mast sticks ➡Hindering the lifting functions and leads to a major accident. As long as you keep checking these points regularly, the life of the forklift becomes longer and you can use it in good conditions. Also no need to worry about having sudden expenses for the repair costs. Another way to save costs and time is using our Forklift Rental Service, which included monthly maintenance by NISHIO’s mechanic. If you have any worries or troubles about the forklift feel free to contact us anytime from here     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

The comparison between long-term rental and purchasing a new Forklift

The Forklift is one of the extremely important and indispensable pieces of equipment for factories and construction sites. However, spending a big amount of money to buy many units of the forklift at the same time is quite difficult for some companies especially in this Covid-19 situation. This is the reason why renting a forklift is one of the effective measures that you can consider. Not only consuming initial investment costs if buying a series of new vehicles but also customers need to care about maintenance, repair, accessories fee in the process of using forklifts. If it has any problems with the quality of that forklift, it will affect the line production and safety of workers. Therefore, a forklift needs to always be in a stable state and well operating. In order to save costs, avoid problems with damaged accessories of forklift and unexpected accidents during operation time, we offer the optimal solution for businesses with our forklift rental service: Customers can rent a forklift in 1 day, monthly or yearly. Our service includes operator training, maintenance support whenever renting a forklift has a problem. At the earliest, we can deliver the forklift within that day you call us.   Buying a new Forklift will cost a big capital investment. Specifically: -First-year: New forklift purchase fee, inspection cost. -After the second year: Maintenance costs; the cost of replacing batteries, tires, and other spare parts and supplies Meanwhile, a long-term forklift rental will save your time and money, without the cost of basic investment. -First-year: Monthly fixed rental fee, no additional fee for maintenance/ repair fee including replace battery, tire, and other parts fee -After the second year: Reduced rental price or replace with a brand new forklift if the contract is renewed. We have 5 branches from the North to South, and we serve the European, England, American, Vietnamese, Korean, Japanese big companies and factories in Vietnam. With a professional mechanic team and the quality from Japan, we always make customers satisfied and trust on our service. Download Forklift Catalog Find more information If you have any requirements, please feel free to contact us!     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

[New] Available for Rent in Vietnam: JLG 860SJ (26.21 meters) and 1500SJ (45.7 meters) Boom Lifts

JLG is one of the world’s leading AWP manufacturers. Among their impressive product lineup are two standout boom lift models, the 860SJ and 1500SJ. NISHIO has recently imported these models to Vietnam to meet customers’ diverse needs. 860SJ is a telescopic boom lift that reaches a maximum height of 86 feet (26.21 meters). It’s an excellent choice for high-rise construction projects and tasks requiring access to elevated positions. Notable features of the 860SJ include: Fast elevation: The 860SJ can reach full elevation in less than 70 seconds Extended horizontal outreach: The boom offers an impressive horizontal reach of up to 75 feet (22.86 meters) Weight capacity: The platform can hold up to 750 lb (340.19 kg) with restricted outreach and 500 lb (226.80 kg) unrestricted Fuel efficiency: Equipped with a DEUTZ TD 2.9L Tier 4 engine, the 860SJ is fuel-efficient and environmentally friendly Standard LED Motion/Amber Beacon with ClearSky Smart Fleet™ Connectivity Hardware Catalogue-JLG-860SJ-Boom-Lift-1 Catalogue-JLG-860SJ-Boom-Lift-2 1500SJ is a larger telescopic boom lift, capable of reaching a height of 150 feet (45.72 meters). It’s ideal for major construction projects and tasks requiring extreme height access. Notable features of the 1500SJ include: Extended horizontal outreach: The boom offers a horizontal reach of up to 80 feet (24.38 meters) Weight capacity: The platform can hold up to 1000 lb (453.59 kg) with restricted outreach and 500 lb (226.80 kg) unrestricted Performance and durability: Built with 100,000 psi steel and equipped with a DEUTZ TD 2.9L Tier 4 engine for optimal performance Ideal for general contractors, glaziers, window cleaners, welders, and more Standard LED Motion/Amber Beacon with ClearSky Smart Fleet™ Connectivity Hardware Catalogue-1500SJ-Boom-Lift-JLG Great news for those in Vietnam: both the JLG 860SJ and 1500SJ models are now available at NISHIO and ready for rent! When you rent a boom lift from NISHIO, you’ll experience international-standard service. Whether you are working on a high-rise building or a major industrial project, NISHIO can meet your needs with these premium boom lifts. NISHIO’s boom lifts are regularly maintained and suitable for projects requiring strict safety standards. Our technicians have been trained directly by JLG, ensuring they have the knowledge and experience to assist customers with any issues and challenges during use. (Reference article: “JLG Experts Visited to Nishio Rent All Vietnam to Train Mechanics on Troubleshooting Boom Lifts“) JLG 860SJ and 1500SJ boom lift models are excellent choices for construction projects and tasks requiring height access. With advanced features and outstanding performance, they will help you complete your work more efficiently and safely!     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Our equipment at the Marina Central Tower project

Located in the center of Ba Son (District 1) – The office, commercial, and service tower project with the commercial name Marina Central Tower (also known as The Sun Tower) has an area of ​​6,000 m2 and is inside the Grand Marina Saigon (the world’s largest Marriott branded real estate complex, operating according to 5* standards). BM Windows was selected as the first domestic aluminum and glass façade contractor in this project to construct the tallest façade project in Vietnam. Construction for a project with a height of up to 240m requires BM Windows to choose flexible solutions and high-precision equipment to ensure absolute safety. We appreciate BM Windows’s trust in NISHIO to accompany us in this project. Below are photos of NISHIO’s lifting equipment and glass panels, such as the Mini crawler crane, Glassworker glass lift, forklift, boom lift, scissor lift… If you’re interested in renting or purchasing the equipment mentioned above, please contact us at 02513683224 or share your details here.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

JLG Experts Visted to Nishio Rent All Vietnam to Train Mechanics on Troubleshooting Boom Lifts

Recently, experts from JLG conducted a one-week visit to Nishio Rent All Vietnam, Dong Nai branch, to train the company’s mechanics on how to handle common issues when using JLG Boom Lifts. During the training, the experts provided in-depth knowledge on regular maintenance and troubleshooting common problems that may occur while operating Boom Lifts. Key topics such as hydraulic system failures, electrical issues, and component maintenance were thoroughly discussed. As a result, Nishio Rent All Vietnam’s mechanics not only improved their professional skills but also gained the ability to respond quickly and effectively to emergencies. When renting equipment from NISHIO, customers can rest assured as they will always receive guidance on operating aerial work platforms from technicians who have gained knowledge and experience from leading experts in the field. This visit helps to maintain the cooperative relationship between JLG and Nishio Rent All Vietnam, aiming to improve equipment performance and ensure safety in project operations.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Technical training about Hybrid Boom Lift with the expert from Genie

Every year, experts from GENIE usually visit and update knowledge for our sales and technical team. This time, we focused on discussing the advanced Genie Hybrid Engine Boom Lift. After learning the documents, our mechanics and Genie expert together practiced fixing basic errors when using the Hybrid boom lifts. They directly worked with Boom lifts available at equipment warehouse. At the end of the course, NISHIO mechanic team have a better understanding of Hybrid engine structure in boom lift, safe operating rules, how to handle situations that may occur to the operator, and how to fix errors that arise if any. Hybrid Boom Lift has many advantages but is not yet popular in the Vietnamese market. Therefore, when renting this type of boom lift, user also need to pay attention to choosing a rental supplier with a highly specialized technical team, fully equipped with knowledge about Hybrid engines on boom lift. Our Mechanic Department currently includes experienced mechanics, and who have graduated from leading technical universities in Vietnam. Both have solid knowledge of machinery and equipment and good English (easy to communicate with foreigner experts). Please come to NISHIO office to experience equipment or contact us for free consultation! Learn more about Genie Hybrid Boom Lift here     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

NISHIO accompanies the contractors in the AMKOR TECHNOLOGY VIETNAM project

AMKOR TECHNOLOGY VIETNAM is the biggest semiconductor factory of Amkor Technology Group in the world, built in Yen Phong Industrial Park II-C (Bac Ninh province). This is also the second semiconductor factory in the North, after Hana Micron Group’s semiconductor factory in Van Trung Industrial Park (Bac Giang province). After the Inauguration Ceremony in October 2023, by December 2023 Amkor Vietnam has produced the first product and is conducting testing, with mass production expected in 2024. Amkor Vietnam factory has a total area of ​​23 hectares, total investment capital of 1.6 billion USD, creating jobs for about 2,000 workers and by 2035 will create jobs for about 10,000 workers. NISHIO RENT ALL VIETNAM is once again honored to provide equipment for the construction process of AMKOR TECHNOLOGY VIETNAM CO., LTD. from the first steps of the project. Up to now, the project has reached the final stage of completion. Let’s look back at some pictures of NISHIO Boom Lifts for rent at this key project!       We always feel appreciated and proud when chosen as an equipment supplier for big projects in Vietnam. We believe that customers are always satisfied and confident in the quality of NISHIO’s services. See more Rental Equipment     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

NISHIO rents equipment to TECHTRONIC TOOLS VIETNAM (TTI) project

NISHIO is providing various equipment to the construction site of TECHTRONIC TOOLS (VIETNAM) project at Saigon Hi-tech Park (Thu Duc, HCM City). This project is invested by TTI (Techtronic Industries) Company – A pioneer in the category of tools, machine accessories, outdoor equipment, cleaning equipment, … such as MILWAUKEE, RYOBI, HOOVER. In this project, Newtecons – SOL E&C and TTI Group are the Design & Construction General Contractors. These contractors have chosen NISHIO as the main supplier of rental equipment. Below are some photos of our Lifting Equipment currently on the project site. Max. Working height: 27.91 meter Max. Platform height: 25.91 meter Max. Horizontal Reach: 22.71 meter Safe Working Load: 300 kg unrestricted, 454 kg restricted Machine Width: 2.49 meter | Machine Length: 12.37 meter Download S-85 XC catalogue here Watch S-85 XC introduction video here Max. Working height: 25.77 meter Max. Platform height: 23.77 meter Max. Horizontal Reach: 18.29 mét Safe Working Load: 227 kg Download Z-80/60 catalogue here Max. Working height: 40.15 meter Max. Platform height: 38.15 meter Max. Horizontal Reach: 24.38 meter Safe Working Load: 227 kg Elevating Rolling Tower (Japan) Max. Working Height: from 1.5 meter to 6 meter Safe Working Load: from 120 kg to 133 kg Please find more information here NISHIO is very honored to accompany the Contractors to build the Techtronic Tools Vietnam Co., Ltd. factory. We are committed to providing equipment that ensures labor safety, full operating instructions, technical support, and timely repairs. NISHIO’s equipment all have inspection certificates, clear origin, and are imported directly from manufacturers, so it can completely meet the strict requirements of the big projects in Vietnam. Please refer to other types of equipment and contact us if you have any inquiries! Construction Equipment     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

NISHIO delivers Boom Lift and Scissor Lift to FPT City Da Nang project

FPT Complex is recognized as a new Centralized IT Zone which is belongs to FPT Da Nang technology urban area project. The Contractors have chosen to rent Boom Lifts and Scissors Lifts with suitable working height. Photo: Genie Electric Scissor Lifts Model: GS-4047 Max. Working height: 14 meter Safe working load: 350 kg Photo: Genie Engine Telescopic Boom Lift Model: S-85 Max. Working height: 27.90 meter Safe working load: 227 kg If you need to rent Boom Lifts or Scissor Lifts in Da Nang area, please send us your inquiry. Beside, you can refer to our CONSTRUCTION EQUIPMENT.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Perfect for both of jobs indoor & outdoor: Genie Z-60/37 FE Hybrid Boom Lift (The First Hybrid Boom Lift in Vietnam)

  Max Working Height  65 ft 7 in | 20.16 m  Max Horizontal Reach  36 ft 7 in | 11.15 m  Max Up and Over Clearance (riser extended)  24 ft 3 in | 7.39 m  Platform Capacity  500 lb | 227 kg  For more details, please click here to view or download PDF file.  1.Fully electric mode: Fully charged in one night for more than 8 hours of operation.  If you don’t want to use generator engine with noise, just turn on this mode and operate as normal electric boom lifts.  2.Hybrid mode: While the boom lift works by diesel engine, the battery can be charged by the generators inside up to 80% of capacity and can run for 4 hours. You can switch machine to this mode when the battery is low, or when it needs to boost the power by using engine.   Refer explanation video from Genie: https://www.genielift.com/en/aerialpros/genie-hybrid-system Charge battery quickly.  More powerful machine which uses 30% less energy than a hydraulic-driven.  Low emission, low noise. Use generator & battery system at the same time. In ‘all-electric’ mode it offers a full workday of emissions-free run time on a single battery charge. In ‘hybrid’ mode, it offers one week of run time with a single tank of diesel.  4WD operation: 35% faster, 45% gradeability for superior terrain ability (climb better than diesel power, ground control).  Dual parallelogram and fully proportional controls for precise boom positioning and smooth performance.  1.52 m articulating jib with a 135° vertical rotation to accurately position workers.  Genie Fast Mast™ boom system allows operators to descend and retrieve materials and quickly return to working height.  *The Hybrid gives you a big benefit in 2 ways:  – First, you onboard and engine can charge the battery. This keeps the machines performing at a high level without stopping to recharge.  -Second, you can use engine and battery at the same time, depending on your purpose and working environment requirement.  *The Hybrid will travel to rough terrain and upgrade even faster than the previous DC machine.  *Even in the dead battery, the engine in AC generator capable of providing enough power for rupturing performance.  This Hybrid articulating boom lift model is a great asset for:  All construction sites  Sport stadiums  Shopping malls   Manufacturing plants   And even difficult walking areas where low noise level and clean performance are required  For example:  Your working area is around one 20 meters building with 45% of slope outside, weights 25% less indoor, low emission and low noise required because it’s near a hospital.  In this case, we need a boom lift that is both powerful, compact, and operates smoothly => Z-60/37 FE is a perfect choice. It depends on the rental term, site location and transportation fee… Please send us your information and inquiry, we will give you a quote soon!     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Lifting equipment (Forklift, boom lift, scissor lift) for rent in Thang Long Industrial Park Hanoi

Forklift and Aerial Work Platform (AWP: Boom Lift, Scissor Lift, Personal Lift…) have an important role in production , transportation and product management for the Industrial Parks as Thang Long IP Hanoi. While the Forklift is an necessary equipment for all manufacture factories & logistic companies, AWP is used for the purposes as system installation, facility renovation. maintenance, cleaning, painting or even cutting trees… Renting equipment as Forklift and AWP is becoming a trend and a solution for the businesses in Thang Long Industrial Park. In this article, we will introduce about NISHIO rental service.  Saving cost: Instead of spending a big budget on buying new brand Forklifts, rental service can help you to save the investing fee and keeping your financial for other activities.  Optimize productivity: Equipment is always in good working condition, ensuring efficient and safe lifting of goods. No worries about maintenance and repairs: Equipment rental service includes maintenance and repairs, helping you focus on your core business. Contractors at construction sites or maintenance contractors inside factories in Thang Long Industrial Park can also contact NISHIO to rent short-term Forklifts and AWPs. There are so many rental equipment companies around Thang Long IP. To find out a high quality service, you should take your attention in these below things: Reputation: If you use suppliers that do not have clear qualifications or lack documents about the origin of machine, it will cause many problems. Machinery quality: Of course, this is what you care about most when looking for a machine and equipment. Old and weak one will easily cause accidents and malfunctions, which will take time to process, thereby affecting work progress and production efficiency. Mechanic team: Mechanics who are well-trained and knowledgeable about the specialized knowledge from the rental service provider will help you save a lot of time by assisting in answering questions and repairing machinery in a timely manner. Forklift and Reach Truck: Toyota, Mitsubishi, Doosan, Clark, Enforcer…. Rate capacity from 1.5 ton to 10 ton Max. Lifting height from 3 meter to 4.5 meter Diesel and Battery type Rental term from 1 day Click here for more information  Stand-on Electric Hand Pallet Electric Hand Pallet Hand Pallet Hand lifter brand Genie Brands: Genie, JLG, Skyjack Scissor Lift (electric): Max. Working height from 7.79 meter to 15.95 meter Scissor Lift (engine): Max. Working height from 18.15 meter  Telescopic Boom Lift (engine): Max. Working height from 21.81 meter to 48.33 meter Telescopic Trax Boom Lift (engine, track): Max. Working height 21.81 meter Articulated Boom Lift (engine): Max. Working height from 12.54 meter to 43.15 meter Articulated Boom Lift (electric): Max. Working height from 12 meter to 20.16 meter Personal Lift (electric): Max. Working height from 5.65 to 14.3 meter Please refer more information from HERE We are a 100% Japanese company with more than 60 years of experience in the international market. We have many branches in different countries. We are ranked 10th among the biggest rental equipment companies in the world and number one in Vietnam. Thang Long Industrial Park was also built in cooperation between Vietnam and Japan, so if you work with NISHIO you will be supported by both countries’ staff. NISHIO is a direct partner of famous brands such as Genie, Doosan, Toyota,… You can rest assured when using new, high quality, genuine equipment with little damage. (Refer to the article: The annual AWP technical training of GENIE at NISHIO｜NISHIO RENT ALL VIETNAM CO., LTD.) We have clear certificates, and other relevant documents if requested. NISHIO’s mechanic team is well-trained and always prepares a clear monthly equipment maintenance checklist to customers. Rental price is probably the primary information that you search most. However, the equipment rental price will include many things such as rental term, machine model, accessories, location… Therefore, please send us more information to receive an accurate quote.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Genie® Tracked Boom Lift – A solution for working in rough and complex terrains.

Boom Lifts are familiar to us, but boom lifts with “tracks“ design are very new and less popular in the Vietnamese market. In this article, we will introduce the Tracked Boom Lift from brand Genie® (Genie® TraX Boom Lift) and our rental service. Every invention comes into existence with a purpose to solve existing problems. The same goes for the design and production of the Tracked Boom Lift. In fact, there are many situations where it is necessary to use a Boom Lift in complex, harsh weather and terrain conditions. If you encounter mud, gravel, sand, snow, dampness, rough ground … it is not possible to use boom lifts with traditional wheels to ensure labor safety.  Experts in Aerial Work Platforms realized that. For example: You need a boom lift to service a telecommunications tower. These towers are often located on a hill or mountain and accessed via unpaved roads. With dry and compact dirt on the road, wheeled lifts can get the job done just fine. But after rainy days, the ground can be soft and flooded. In this case, using Tracked Boom Lift is more suitable and safer.  Here are some other conditions:  Gravel and fine sand — Because of their broader weight distribution, tracks should be the choice for these surfaces, which can be found in sand and gravel pits, oil and gas sites and elsewhere.    Rough, unfinished environments — For example, a construction site that’s not graded and leveled. Tracks are great at climbing up and over obstacles. Genie® tracked boom lifts are particularly good because they feature our TraX™ independent four-point system — each track can independently operate, so they individually grip and climb over obstacles. The skid steer-style tracks some brands offer — with a single, full-length track on each side of the machine — don’t go over rough, uneven environments nearly as well, and the machine will rock more. Slopes on rough, hilly terrain — Genie® tracked machines offer great gradeability (40-45% depending on the model). Remember, this is with the boom in a stowed position. Any time you’re elevated, you need to be on firm, level ground. You can watch the below video:  (Cre: https://www.genielift.com/en/aerialpros/boom-lift-tires-vs.-tracks-which-is-right-for-you) The TraX Boom Lift series is specially designed by Genie® to address challenging terrain and weather conditions.   Unlike traditional boom lifts with wheels, the TraX series features an innovative track design that enhances its terrain ability. If you need a solution for working at height in seemingly inaccessible areas, then TraX Boom Lift is the best choice.  Primary Features:  Benefits:   Four-point QTS Trax system   Excellent traction for traveling in mud, sand, snow, gravel, water and turf +/- 23 degrees of track swivel   Easy loading onto trailers and excellent tracking in rough terrain providing smooth, comfortable riding. 0.44 m W x 1.02 m L footprint dimensions Provides 104 lugs in constant ground contact for superior ‘crawling’ power. Thick rubber track It can be used on weak surfaces without altering the shape or affecting the structure of the flat surface. 3.7 km/h (2.3 mph) maximum drive speed Good productivity. 4WD, active oscillating axles, positive traction hydraulics Same hydraulic circuits and active oscillating system as other Genie® S™-60/65 booms lower cost of ownership and make service easy. Traditional front wheel steering with 30-degree steer angle   Steers are like a traditional boom with less damage to surfaces. Allows working close and parallel to walls. Please refer to this video from Youtube: So, we have highlighted the outstanding advantages of the Genie TraX Boom Lift that help you easily imagine the utility of using it.   Remember, the Tracked Boom Lift is all about increased terrain ability, allowing you to work anywhere all year-round!  There are few companies which provide this model in the Vietnamese market. Because the use of boom lifts is mainly in plain and urban areas, where the terrain is flat or not very complicated.   However, many remote and mountainous areas in Vietnam are gradually springing up many construction sites to build resorts, security and defense zones, wind farms…  Using a Tracked Boom Lift is an extremely reasonable solution for these projects.  We can deliver Tracked Boom Lifts to some areas such as Quang Ninh, Quang Nam, Quang Ngai, Quang Binh, Daklak, Kontum, Gia Lai… – the areas suitable for using this boom lift type.  Please note that NISHIO will ship equipment from our Hanoi, Da Nang, Quang Nam, Dong Nai branches. So that, you should rent boom lifts for a long time by week – month – year to minimize transportation costs.  Currently in Vietnam, we rental the Telescopic Tracked Boom Lift model S-65 TraX (brand Genie®) which offer dual lift capacity and increased efficiency on construction and industrial job sites.  This model comes equipped with features like full-time active oscillating axles, chassis tilt sensors, and automatic envelope control technology, making them versatile and reliable for various work scenarios. Specifications:  Max Working Height  71 ft | 21.81 m  Max Horizontal Reach  54 ft 2 in | 16.51 m  Below Ground Reach  8 ft 8 in | 2.65 m  Platform Capacity  660 lb Unrestricted, 1,000 lb Restricted | 300 kg Unrestricted, 454 kg Restricted  Machine Width and Length  8 ft 2 in, 32 ft | 2.49 m, 9.76 m  Machine Weight 13,098 kg For more details, you can learn about Genie® S-65 TraX Telescopic Boom Lift on Genie® website.    At first glance, it may seem that the cost of renting a Tracked Boom Lift will be higher than that of a wheeled one.   However, as we mentioned above: Using a Tracked Boom Lift can increase productivity, improve work safety, and save time.  Suppose you try to use a wheeled boom lift in a complex construction environment:  – You must operate boom lift at an extremely slow speed => require additional time.  – You would need to level the ground for safety => require additional labor and equipment.   In this case, using a Tracked Boom Lift can help reduce the number of rental days based on the work productivity it brings. Therefore, the total rental cost may even be lower than renting a wheeled boom lift.      Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Arial Work Platform equipment for rent in Thu Duc (District 9) – HCMC (Saigon) area

Boom lifts are widely used for outdoor construction areas requiring a working height of over 12 meters. Meanwhile, Scissor lifts will be used when the working height is 7.5~18 meters. Both have Electric (Battery) and Engine (Diesel) models. In addition, NISHIO also rental other types of AWP equipment that you can refer HERE. Or refer to list of our all rental equipment. Photo: BM Windows Company rented Boom lifts and many other equipment from NISHIO to carry out the TTI factory construction project (Saigon High-Tech Park) Thu Duc – HCM city is the areas with the most modern construction projects, factories and buildings in Vietnam. Therefore, construction companies and foreign-invested factories have very high and strict requirements on the safety of equipment. NISHIO is proud to always receive trust and choice from customers and partners. We commit to prepare machine in a good condition and do free maintenance for long term rental contract. Some photos of projects in Thu Duc (Dist.9) – HCM city Project: Maintenance work at Vivian building – Sai Gon Hightech Park If you need to RENT AWP EQUIPMENT or rent other NISHIO’s equipment in District 9 – Thu Duc city – HCM city area, please call to our Hotline number below or leave your contact information here. We will quickly respond and send a quotation to you.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

NISHIO rents Scissor Lifts to HYOSUNG factory in Tam Thang Industrial Park, Quang Nam

Recently, we have transported Scissor Lifts to support the Fire Protection System installation of one M&E contractor at HYOSUNG Factory – Tam Thang Industrial Park, Quang Nam province. The Scissor Lift rental at Hyosung is model Gs-3246 brand Genie with the below specification: Type Electric (Battery) Max.platform height 9.75 meter Max.working height 11.75 meter Safe working load 318 kg Currently, NISHIO VIETNAM has a branch at Dong Yen Village, Tam Nghia Commune, Nui Thanh District, Quang Nam Province. Because of the same area, the transportation Scissor Lifts to Hyosung factory is very convenient and it helps to save cost for customer. Moreover, our Mechanic team can support easily and quickly if machine meet any problems. We sincerely thank the Contractor and Hyosung Quang Nam company for your trust to use our equipment rental service. We are delighted to provide high quality equipment and honored to contribute building to one of the first manufacturing factories in Tam Thang Industrial Park. Beside Scissor Lift rental, we also supply other equipment to this area, such as: Boom lift, Generator, Air compressor, Lighting tower… (Refer Construction Equipment | Industrial Equipment at here) If you have a need of renting construction and industrial equipment in Quang Nam as well as surrounding areas, please leave your contact information here or call the Hotline number below to receive a quote from us!     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

LIST OF SCISSOR LIFT MODELS FOR RENT IN VIETNAM (UPDATED TO 2024/1)

NISHIO RENT ALL VIETNAM CO.,LTD. mainly imports Scissor Lifts directly from three famous brands: Genie, SkyJack and Haulotte. Please refer information as below. GS1930 (7.79m working height) – Safe working load: 227kg GS1932 (7.85m working height) – Safe working load: 227kg GS2032 (7.92m working height) – Safe working load: 353kg GS2046 (8.10m working height) – Safe working load: 544kg GS2632 (9.80m working height) – Safe working load: 227kg GS2646 (9.80m working height) – Safe working load: 454kg GS3246 (11.75m working height) – Safe working load: 318kg GS4047 (13.94m working height) – Safe working load: 350kg We have updated and supplied a big quantity of Genie E-Drive Scissor Lifts to customers in the Vietnam market. This is the new and most modern Electric Scissor Lift lineup from Genie, using an AC motor instead of a Hydraulic motor or DC motor like the previous scissor models. GS1932m E-Drive (7.55m working height) – Safe working load: 227kg GS1930 E-Drive (7.85m working height) – Safe working load: 227kg GS2646 E-Drive (9.96m working height) – Safe working load: 454kg GS3246 E-Drive (11.78m working height) – Safe working load: 318kg GS4046 E-Drive (13.94m working height) – Safe working load: 350kg GS4655 E-Drive (15.95m working height) – Safe working load: 350kg WHY GENIE® AC E-DRIVE? 35% MAINTENANCE COST SAVINGS 30% INCREASE IN RUNTIME AND EFFICIENCY 70% FEWER HOSES AND FITTINGS GS5390 (18.15m working height) – Safe working load: 9,100kg SJ3219 (7.79m working height) – Safe working load: 227kg SJ4732 (11.65m working height) – Safe working load: 318kg If you need to check more specifications, please check it here If you want to receive our rental quotation, please contact us by the below button and hotline, or our chat box beside.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

NISHIO is continuously supplying more Genie XC Boom Lifts to the Vietnam market

NISHIO VIETNAM has imported a large quantity of  Genie “XC” Boom lifts. All of these Boom lifts are available in Vietnam and ready for rent! When you see the character “XC” beside the model name, then you know it’s an XC Boom lift! XC here means “Xtra Capacity” Responding to customer demand worldwide for aerial work platforms to handle heavy lifting, Genie Xtra Capacity (XC) boom lifts are designed to work in more applications that require a higher lift capacity. When you need a high-lift machine on the jobsite, platform capacity matters. Standard-capacity boom lifts can’t exceed 500 lb (227 kg). Meanwhile, all Genie XC™ boom lifts have dual lift capacity to provide an unrestricted platform capacity of 660 lb (300 kg) and a restricted capacity of 1,000 lb (454 kg). This reduces the number of lift cycles and the amount of equipment needed to get tools and materials to aerial worksites — doing more with a single unit saves time and increases productivity. In addition to increased platform weight capacity, all Genie Xtra Capacity lifts feature: Room for up to three people on the platform Simple, zero-load field calibration Load Sense Technology: The boom won’t lift if the maximum load is exceeded The Genie XC interactive tool lets you virtually place materials, attachments and operators in and on a virtual boom platform; then it automatically calculates the load weight. If the weight of what you’ve added to the platform is under the boom lift’s rated capacity, the load will rise — but if you’ve exceeded its capacity, the load will stay on the ground. The interactive tool experience shows you how industry-mandated platform load-sensing technology works in the real world: It disables the boom lift if the load weight is above its rated capacity. If the load weight is below that rated capacity, the virtual boom lift will work within its operating envelope. CLICK HERE TO TRY THE GENIE XC INTERACTIVE Max Working Height 27.91 m Max Horizontal Reach S-85 XC: 22.71 m Below Ground Reach 2.64 m Platform Capacity 300 kg Unrestricted, 454 kg Restricted Machine Width and Length 2.49 m, 12.37 m Download catalogue Max Working Height 40.10 m Max Horizontal Reach 24.38 m Below Ground Reach 2.69 m Platform Capacity 300 kg Unrestricted, 454 kg Restricted Machine Width and Length Width: 2.49 m – 3.94 m | Length: 14.25 m Download catalogue Max Working Height 43.15 m Max Horizontal Reach 27.43 m Below Ground Reach 6.00 m Platform Capacity 300 kg Unrestricted, 454 kg Restricted Machine Width and Length Width: 2.49 m – 3.94 m | Length: 19.76 m Download catalogue Note: Some specifications in the catalog such as machine size, wheel size... can be different with real depending on the year of manufacture.   Genie S-85 XC: Contact us for more information!     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Area Work Platforms (Scissor Lift, Boom Lift…) rental service in Da Nang (Hoa Khanh IZ, Hi-tech park…)

You should rent equipment from NISHIO because we are the most diverse industrial and construction equipment rental company in Vietnam. NISHIO has a branch in Dong Yen Village, Tam Nghia Commune, Nui Thanh District, Quang Nam Province and this is also our equipment warehouse in the Central area Vietnam. We provide all necessary procedures and documents to customer. Ready to transport to surrounding areas such as Da Nang, Hue, Quang Ngai, Binh Dinh, DakLak… In addition to AWPs, NISHIO also rents a variety of other equipment such as generators, air compressors, mobile lighting towers,… [See more here: Equipment construction | Industrial/factory equipment] Recently, we are pleased that HEINEKEN VIETNAM – Hoa Khanh IZ, Da Nang chose to use our Articulate Boom Lift Z-135 for maintenance work outside their factory. Below is the specification of Boom lift Z-135 that they rent from us: Brand GENIE Type Articulate Boom Lift Engine Diesel Max. platform height 41.15 meter Max. working height 43.15 meter Safe working load 272 kg Application Suitable for repair, installation, and maintenance work outside of buildings.       One high-light project that rent our AWPs equipment in Da Nang is Universal Alloy Corporation Vietnam factory (Hoa Lien, Hai Chau). This project used our AWP models such as: Articulated Boom lift model Z-80/60 Brand GENIE Type Articulated Boom Lift Engine Diesel Max. Platform height 23.77 meter Max. Working height 23.77 meter Safe working load 227 kg Application Suitable for repair, installation, and maintenance work outdoors or inside workshops/buildings with high ceilings, large, airy areas, and no obstructions. Telescopic Boomlift model S-85 Brand GENIE Type Telescopic Boom Lift Engine Diesel Max. Platform height 25.90 meter Max. Working height 27.90 meter Safe working load 227 kg Application Suitable for repair, installation, and maintenance work outdoors or inside workshops/buildings with high ceilings, large, airy areas, and no obstructions.   Model GS-2646 Brand GENIE Type Scissor Lift Power Electric Max. Platform height 7.80 meter Max. Working height 9.80 meter Safe working load 454 kg Application Suitable for repair, installation, and maintenance work inside or outside. Genie Electric Scissor Lifts Model: GS-4047 Max. Working height: 14 meter Safe working load: 350 kg Genie Engine Telescopic Boom Lift Model: S-85 Max. Working height: 27.90 meter Safe working load: 227 kg Rental price depends on project location and equipment models. Don’t hesitate to ask us if you need to rent equipment in Da Nang and surrounding provinces. You can contact us by below Hotline number or send your information and inquiry here for more details.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Forklift and AWP equipment for rent in Quoc Oai-Thach That-Hoa Lac and around the Hanoi areas

With a location adjacent to the inner city of Hanoi, Thach That Quoc Oai Industrial Zone and especially Hoa Lac Hi-Tech Park are currently developing many leading key investment projects. Therefore, the need to rent construction and industrial equipment is highly increasing, including Material Handling/Lifting equipment and Arial Working Platforms. Address: Lot CN3*, Thach That – Quoc Oai Industrial Park, Phung Xa ward, Thach That district, Hanoi city. Phone: 02433940471 or 02513683224   Our headquarters is located inside Thach That-Quoc Oai Industrial Zone, which is very convenient for transportation equipment to neighboring areas, this greatly reduces transportation costs for you. We provide a variety of Forklift types from diesel forklifts, battery forklifts, reach trucks … The number of equipment at NISHIO Hanoi is the largest among NISHIO’s branches in Vietnam. You can easily find the type of equipment that suits your needs. Prompt delivery: Fastest delivery on the same day that we receive your inquiry. The machine will be maintained by our high-skill mechanic team.  (For your reference: GENIE annual AWP technical training at NISHIO) Japanese quality service. No.12 in the rental equipment companies global ranking. Our machine is always in a good condition that adapt safety standards. Almost machine are imported from the famous brands such as Toyota, Mitsubishi,.. We also update the new models in every year. We especially encourage your business to use our long-term rental service, which can help you to reduce your initial investing cost, maintenance fee and other fees. Capacity: 1 ton – 1.5 ton – 2.5 ton – 3 ton – 4 ton – 6 ton – 10 ton | Max. lifting height: 3 – 5 meter NISHIO rental TOYOTA Diesel Forklift in a factory Capacity: 1 ton – 1.5 ton – 1.8 ton – 2 ton – 2.5 ton – 3 ton | Max. lifting height: 3 – 4.7 meter Renting a Lithium Forklift helps protect the environment, save energy and increase your work productivity by quick charging. Capacity: 1 ton – 1.5 ton – 2 ton – 2.5 ton – 3 ton | Max. lifting height 3 – 6 meter One customer is checking NISHIO Reach Truck inside a warehouse. Capacity 1.6 ton | Max. lifting height 4.5 meter Capacity: 2 ton Capacity: 1.8 ton Capacity: 2.5 ton 3 ton | Max. lifting height 2 meter GS1930 (7.79m max. working height) GS1932 (7.85m max. working height) GS2032 (7.92m max. working height) GS2046 (8.10m max. working height) GS2632 (9.80m max. working height) GS2646 (9.80m max. working height) GS3246 (11.75m max. working height) GS4047 (13.94m max. working height) GS1932m E-Drive (7.55m max. working height) GS1930 E-Drive (7.85m max.working height) GS2646 E-Drive (9.96m max. working height) GS3246 E-Drive (11.78m max. working height) GS4046 E-Drive (13.94m max. working height) GS4655 E-Drive (15.95m max. working height) GS5390 (18.15m max. working height) 1939ES (7.72m max. working height) SJ3219 (7.79m max. working height) SJ4732 (11.65m max. working height) Z33/18DC (12m max. working height) Z45/25DC (15.87m max. working height) Z60/37 DC (20.16m max. working height) Z34/22IC (12.54m max. working height) Z45/25 (15.86m max. working height) Z60/34 (20.39m max. working height) Z62/40 (20.87m max. working height) Z80/60 (25.77m max. working height) Z80/60 (25.77m max. working height) Z135/70 (42.15m max. working height) S65 (21.81m max. working height) S65 Trax (9.76m max. working height) S80 (26.38m max. working height) S85 (27.90m max. working height) S-85 XC (27.91m max. working height) S100 (32.48m max. working height) S125 (40.15m max. working height) SX150 (48.33m max. working height) 860SJ (28.21m max. working height) AWP40S (14.3m max. working height) SJ12 (5.65m max. working height) QU13 (13.7m max. working height) QU14 (14.3m max. working height) STAR10 (10 m max. working height, 3m Horizontal outreach, 345° Turntable rotation) For more detailed information such as maximum load, working time of the machine, machine size… You can view and download the catalog here, or contact us to get direct support. It depends on your project location, quantity and rental term. Please send us more information to get an exactly quotation!     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

The annual AWP technical training of GENIE at NISHIO

This past week, the famous AWP manufacturer – GENIE, visited and organized annual technical training for NISHIO Mechanics. Genie is an American brand established since 1961. This brand is known as one of the leading manufacturers and suppliers of AWPs in the world. Genie has affirmed its position in the Vietnamese market with its excellent payload capacity and durable working capacity. They constantly updates the most modern and advanced technologies to produce new models of AWPs every year. Nishio Group has been one of Genie’s strategic partners globally for decades. Therefore, GENIE is always enthusiastic and ready to support us, as well as directly visit and train Nishio’s staff. We hope to always cooperate with Genie and develop comprehensively reputable and good quality AWPs products in Vietnam. [CONTACT US for more information about AWP]     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

AWP equipment (Scissor lift and Boom lift…) for rent in Vietnam

Below are some benefits that we can list to you: Saving cost and time: This is best advantage that equipment rental service can bring to your business. If you choose purchase brand new machine, you must to pay a big initial budget and spend a long time for preparing the complicate documents by yourself. Flexible and diverse: It’s easy to understand. Sometimes you need to use more than one unit of equipment. Therefore, your company can not buy a new one immediately and do not have enough budget to do that. At that time, of course, you should find out a rental machine supplier. Safety and high-quality machine: If you purchase a machine, you may choose the used one or old models to save money. That kind of machine can have some troubles and that leads to accidents in operating. Meanwhile, you can choose a very new machine from supplier. For example, in NISHIO, we import new machine in every year. (Refer this news: NISHIO is continuously supplying more Genie XC Boom Lifts to the Vietnam market)  Increase work efficiency: Whenever the machine get problems, you do not need to find the repairing machine service which will charge a quite expensive fee (exclude the spare parts replacement fee). All you need to do is calling supplier. So, now you can clearly see how equipment rental service can support your business! Renting equipment in day is very common. However, supplier also need time to prepare document and check equipment condition before deliver machine to your side. Therefore, it’s better to send your orders in the previous days. When start to research about Scissor Lift and Boom Lift, you may consider which type is more suitable with your needs. Both of Engine (Diesel) and Electric (Battery) have their own pros and cons Diesel Engine: using diesel to run an engine system inside the machine. This type is stronger than Electric AWP, so it normally is used outside for construction works. However, because using Diesel causes heavy air pollution and big noises, Diesel AWP can not be used inside of the factories and buildings. Electric AWP uses a battery power source. It is clean and less noise. Therefore, people usually use it for the maintenance work and inside the factories. This company was established in 1961, from UK. Genie is known as a famous brand in Aerial Equipment manufacturing with many exclusive inventions. Currently, GENIE is one of the most popular brand in Vietnam AWP equipment market. GENIE promises to deliver the Quality your business needs: Durable equipment, expert support, and dependable parts. NISHIO and GENIE have had a business relationship since we established in Vietnam until now. We import a large number of machines from GENIE every year. Refer: The annual AWP technical training of GENIE at NISHIO Skyjack is a Canadian forklift brand founded in 1985. This company provides the high quality lifting equipment such as Boom Lift and Scissor Lift. Below are some standards to chose a good company that provide equipment rental service: Repution: You should look for the ranking of reputable machinery and equipment rental companies in the Vietnamese market. Or ask the experienced people. Number of machine: The number of machine/equipment available for rent from the supplier shows their investment level and also to ensure that they always have a machine replacement plan. Reasonable price: The rental price must be suitable with the machine quality. Machine quality: You should check it carefully to avoid the unexpected accidents. NISHIO RENT ALL VIETNAM CO.,LTD. is the leading company in Equipment Rental Service. No.12 in the ranking list of 100 biggest companies that do machinery rental service in the world. More than 60 years experience in global and more than 10 years in Vietnam market. Our machine number and machine lineup for rent is the biggest and the most diverse in Vietnam. We provide AWP equipment daily to yearly rental nationwide. We are the business partner of the famous brands: Genie, Skyjack, JLG… We are trusted and chosen by reputation contractors to be a supplier of AWP equipment for most key projects in Vietnam. (Renewable energy projects, Thermal power, Gas, Commercial buildings, Infrastructure & Civil,…) Our rental price includes the maintenance service by a team of high-skilled mechanic.  Equipment rental price must be one of the thing that makes you feel concern. The quotations of each companies can be different, it depends on many factors. However, we express that Price is usually based on machine quality. It is perfect if you can find out a good service together with a good price. But if the price is much cheaper than market price, it may hide some unexpected troubles. GS1930 (7.79m max. working height) GS1932 (7.85m max. working height) GS2032 (7.92m max. working height) GS2046 (8.10m max. working height) GS2632 (9.80m max. working height) GS2646 (9.80m max. working height) GS3246 (11.75m max. working height) GS4047 (13.94m max. working height) GS1932m E-Drive (7.55m max. working height) GS1930 E-Drive (7.85m max. working height) GS2646 E-Drive (9.96m max. working height) GS3246 E-Drive (11.78m max. working height) GS4046 E-Drive (13.94m max. working height) GS4655 E-Drive (15.95m max. working height) GS5390 (18.15m max. working height) 1939ES (7.72m max. working height) SJ3219 (7.79m max. working height) SJ4732 (11.65m max. working height) Z33/18DC (12m max. working height) Z45/25DC (15.87m max. working height) Z60/37 DC (20.16m max. working height) Z34/22IC (12.54m max. working height) Z45/25 (15.86m max. working height) Z60/34 (20.39m max. working height) Z62/40 (20.87m max. working height) Z80/60 (25.77m max. working height) Z80/60 (25.77m max. working height) Z135/70 (42.15m max. working height) Z60/37 FE (20.16m max. working height) S65 (21.81m max. working height) S80 (26.38m max. working height) S85 (27.90m max. working height) S-85 XC (27.91m max. working height) S100 (32.48m max. working height) S125 (40.15m max. working height) SX150 (48.33m max. working height) S-65 TraX (21.81 max. working height) 860SJ (28.21m max. working height) AWP40S (14.3m max. working height) SJ12 (5.65m max. working height) QU13 (13.7m max. working height) QU14 (14.3m max. working height) STAR10 (10 m max. working height, 3m Horizontal outreach, 345° Turntable rotation) For more detailed information (maximum load, working time of the machine, machine size…) You can view and download the catalog here, or contact us to get direct support. B1. Customers send their company information and inquiry. B2. NISHIO contacts to discuss and send customer quotations. B3. Customer confirms order and send us PO. B5. For new customers: 100% advance payment for the first month rental and at least one-way transportation fee.        For existing customers: End-month payment. B6. NISHIO delivers the equipment, provides operating instructions. Then customer checks the status of equipment and signs in documents.   NISHIO Boom Lift in a Wind Farm project Our Boom Lift in a Ship Yard AWP equipment at Sora Garden project Personal Lift in Aeon Mall Contact us if you need to rent any equipment. NISHIO VIETNAM address: Hanoi Head Office: Lot CN3*, Thach That – Quoc Oai Industrial Park, Phung Xa ward, Thach That district, Hanoi city. (02433940471) Da Nang branch: Road No. 10, Hoa Khanh Industrial Park, Hoa Khanh Bac ward, Lien Chieu district, Da Nang. (02513683224) Quang Ngai Branch: Doc Soi intersection, Dong Binh district, Quang Ngai province. (02513683224) South branch: No. 990 Hanoi Highway, Quarter 2, Binh Da Ward, Bien Hoa City, Dong Nai Province.(02513683224)     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

The “Do” theater (Vega City Khanh Hoa) used Nishio’s boom lifts

On April 1st, the theater project with a unique architecture named ” The Do” (a folk fishing farming tool) was inaugurated at the Vega City project in Nha Trang City – Khanh Hoa. It can be said that this is an important highlight of the overall project. The inauguration ceremony was attended by representatives of many ministries, departments, branches and especially Prime Minister Pham Minh Chinh. It proves the importance of The Do Theater for the future tourism development of Khanh Hoa province. Theater “Do” is a rare theater project in Vietnam today that meets strict standards of world-class art performance. The theater’s lights are imported directly from Europe, which is also the first private theater building in Vietnam. Photo by: Brands and public opinion e-magazines KDI Holdings Group, the investor of the Vega City Nha Trang resort-entertainment-art complex and the contractors have made great efforts to build the Theater in accordance with the standards, safety and completion on time. For big and important projects, all equipment in the construction site needs to strictly comply with regulations on machine safety and labor safety. In addition, the machinery supplier needs to be flexible, promptly handle problems during use, and provide detailed operating instructions for the construction unit. As a leading equipment rental company in Vietnam, Nishio is honored to be selected by the contractors to provide the Aerial Work Platform for this project. The boom lift was used in this project is a Genie boomlift model S-85. This boomlift’s maximum height is 26.21m (from the ground to the floor) and the maximum working height (from the ground to the end of the human arm) is 28.21m. Genie S-85 uses a powerful diesel engine, well suited for the job site. We would like to say thanks to the investors and contractors for your trust in our service. It is proud to have contributed to perfecting a beautiful cultural symbol of Nha Trang in particular and the country in general. Hopefully, Nishio will continue to accompany investors and contractors in projects across the country. If you need to rent a boom lift or any other equipment, you can refer to the product catalog here then contact us by sending your information here or call us via phone number 02513683224.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Things you need to know when using the Scissor Lift on a slope

We all know that using a scissor lift on a slope is very dangerous. But, some scissor lifts can be used on an incline. In this case, it may be safe to use them on a slope — as long as you don’t exceed the scissor lift’s maximum working angle. The max working angle may be listed on a scissor lift’s ID plate. Or, it may be marked by a decal on the platform. You can always find it in the operator’s manual, too. And if your scissor lift is not rated for an angle, it should only be used on firm, level ground.   A sloping sites Before using a scissor lift on a slope, inspect your worksite for any other hazards besides the slope. Other safety tips include: ✓ Read the operator’s manual and follow all guidelines for driving or working on slopes. ✓ Never raise or extend the platform unless the lift is on a firm, level surface. ✓ Don’t drive on a slope unless you know the angle. ✓ Limit the speed according to the surface traction of the slope. ✓ Never exceed the maximum slope rating for the lift. ✓ Plan for extra braking distance on slick or unstable surfaces. ✓ Never use a driver who has not been trained on how to use a scissor lift on a slope.   Nishio’s Genie brand Scissor Lift The Outriggers and Wheel stops can improve safety with a scissor lift, especially when we park or work on inclines. The purpose is keep the level, increased stability and a reduced risk for a tip-over. You can add outrigger boards under the outrigger to keep the level and increase stability further. Another purpose of the outriggers is to allow the scissor lift to carry a heavier load safely. Wheel stops NISHIO prepares wheel stops when we keep machine at our warehouse Some scissor lift with Outriggers Finally, you are still worry about using scissor lift on sloping site, please do not hesitate to contact us! Related AWP news： Things you need to know when using a Boom Lift on a slope The NEW scissor lift for rent: GS1932m E-Drive (Slab Scissor Lifts) New Genie 14m GS4655 is now available in Vietnam!       Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Things you need to know when using a Boom Lift on the slope

Boom lifts can go much higher than scissor lifts — up to 39.6m (130 feet) or more. They offer greater flexibility than scissor lifts, since the bucket rests on a hydraulic arm and can move in all directions. Meanwhile, boom lifts have smaller platforms than scissor lifts to keep the safe because it goes up higher than scissor lift. They are also ideal for jobs where the worksite is small or hard to access. Like scissor lifts, boom lifts aren’t recommended to use on a hill or incline. The center of gravity is higher with this machine than with many others, which increases the risk for a tip-over. However, it is possible to work on an incline as long as you don’t exceed the maximum slope with a safe working load for the boom lift. Safely driving a boom lift on a slope starts with knowing the lift’s maximum slope rating is very important. A digital inclinometer can be used to measure the exact degree of a slope. If you don’t have one, place the board at least 3 feet long on a slope. Then, place a carpenter’s level on the board and raise the lower end of the board level until it is horizontal. Once you do that, complete these steps: Measure the distance to the ground. Divide the distance by the length of the board. Multiply the result by 100.   This simple formula provides the percent of the slant. If the number exceeds the max slope rating, do not drive the lift on the slope. Instead, winch or hoist the lift across the sloped area. Keep in mind that max slope ratings can change due to ground conditions and weather. For example, mud or loose gravel can reduce traction and extend stopping distances. Driving speeds need to be reduced when crossing sloped or rough terrain as well. Proceed with caution why you drive a boom lift on a slope near drop-offs or cliffs. There are many things that you can do to safely use a boom lift on a slope, such as: ✓ Use a pre-operation checklist to inspect a lift before you use it. ✓ Make sure a lift’s tires are inflated to the proper pressure, as low or high pressure can impact a lift’s stability. ✓ Check the surrounding area for un-compacted fill, ditches, and holes and address these issues before you begin work. ✓ Only use a lift designed to climb slopes. ✓ Check the weather report before you start work; if inclement weather is on the horizon, you need to plan accordingly. ✓ Make sure operators and ground workers are trained and certified to use a boom lift.   Construction Equipment A boom lift should never be used in winds that exceed 45km/hour (28 mph). When in doubt about whether to operate a boom lift in high wind conditions, use your best judgement, and always err on the side of caution. Furthermore, you should always check a worksite for overhead hazards, such as overhangs or high-voltage power lines. As a general rule of thumb, stay at least 50 feet away from electrical wires on steel towers and 30 feet away from wires on wooden or concrete poles. Last but not least, remember that using an Articulating Boom Lift is safer than using a Telescopic Boom Lift on the slope. A boom lift safety training course can make a world of difference. By receiving boom lift safety training, you can learn how to properly operate a boom lift on slopes, lower your risk of boom lift accidents, and more. NISHIO also offers training lessons for safe operation to your operators. If you have any questions, do not hesitate to contact us! .     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

The NEW model Scissor Lift for rent: GS1932m E-Drive (Slab Scissor Lifts)

  ⁙ Micro-size ideal for low-level installation and maintenance jobs in tight spaces  ⁙ Zero inside turning radius ⁙ Powerful AC electric drive motors for unmatched driving performance and industry-leading runtime per battery charge ⁙ Low weight 2,600 lb (1,179 kg), ideal for work on sensitive floors ⁙ 500 lb (227 kg) max lift capacity indoors and outdoors ⁙ Fits through a doorway with fixed rails Max Working Height 24 ft 2 in | 7.55 m Platform Capacity 500 lb | 227 kg Machine Width 32 in | 0.81 m Machine Length 4 ft 7 in | 1.40 m Weight 2,600 | 1,179 kg ⁙ Lighter and smaller to 20% compare with other scissors lift in the market ⁙ Save to 35% maintenance fee by the AC E-Drive which less effect on battery and accessory     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Z33/18, the latest equipment in the Boom Lift series. More products, more flexible options for our customers.

In early October 2016, NISHIO Rent All Vietnam officially introduced the Z33/18 model of the boom scissor lift series. This addition provides customers with more options for their lifting needs. Specifications: Model: Z33/18 Maximum working height: 12m Load capacity: 200kg Power source: Battery-powered     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Nishio’s Boomlift moves to Quang Binh for King Kong- Skull Island

Kong-Skull Island crew always believed and choose Nishio is the main supplier for equipment which supported for the film Nishio Boomlift always be appreciated by the high quality and good design. Nishio’s Boomlift on the way go to Quang Binh In addition, services of Nishio also always appreciated by the enthusiastic and experienced mechanic The crew members are also very friendly with Nishio’s staff     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Arial Work Platform equipment for rent in Thu Duc (District 9) – HCMC (Saigon) area

Boom lifts are widely used for outdoor construction areas requiring a working height of over 12 meters. Meanwhile, Scissor lifts will be used when the working height is 7.5~18 meters. Both have Electric (Battery) and Engine (Diesel) models. In addition, NISHIO also rental other types of AWP equipment that you can refer HERE. Or refer to list of our all rental equipment. Photo: BM Windows Company rented Boom lifts and many other equipment from NISHIO to carry out the TTI factory construction project (Saigon High-Tech Park) Thu Duc – HCM city is the areas with the most modern construction projects, factories and buildings in Vietnam. Therefore, construction companies and foreign-invested factories have very high and strict requirements on the safety of equipment. NISHIO is proud to always receive trust and choice from customers and partners. We commit to prepare machine in a good condition and do free maintenance for long term rental contract. Some photos of projects in Thu Duc (Dist.9) – HCM city Project: Maintenance work at Vivian building – Sai Gon Hightech Park If you need to RENT AWP EQUIPMENT or rent other NISHIO’s equipment in District 9 – Thu Duc city – HCM city area, please call to our Hotline number below or leave your contact information here. We will quickly respond and send a quotation to you.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Forklift and AWP equipment for rent in Quoc Oai-Thach That-Hoa Lac and around the Hanoi areas

With a location adjacent to the inner city of Hanoi, Thach That Quoc Oai Industrial Zone and especially Hoa Lac Hi-Tech Park are currently developing many leading key investment projects. Therefore, the need to rent construction and industrial equipment is highly increasing, including Material Handling/Lifting equipment and Arial Working Platforms. Address: Lot CN3*, Thach That – Quoc Oai Industrial Park, Phung Xa ward, Thach That district, Hanoi city. Phone: 02433940471 or 02513683224   Our headquarters is located inside Thach That-Quoc Oai Industrial Zone, which is very convenient for transportation equipment to neighboring areas, this greatly reduces transportation costs for you. We provide a variety of Forklift types from diesel forklifts, battery forklifts, reach trucks … The number of equipment at NISHIO Hanoi is the largest among NISHIO’s branches in Vietnam. You can easily find the type of equipment that suits your needs. Prompt delivery: Fastest delivery on the same day that we receive your inquiry. The machine will be maintained by our high-skill mechanic team.  (For your reference: GENIE annual AWP technical training at NISHIO) Japanese quality service. No.12 in the rental equipment companies global ranking. Our machine is always in a good condition that adapt safety standards. Almost machine are imported from the famous brands such as Toyota, Mitsubishi,.. We also update the new models in every year. We especially encourage your business to use our long-term rental service, which can help you to reduce your initial investing cost, maintenance fee and other fees. Capacity: 1 ton – 1.5 ton – 2.5 ton – 3 ton – 4 ton – 6 ton – 10 ton | Max. lifting height: 3 – 5 meter NISHIO rental TOYOTA Diesel Forklift in a factory Capacity: 1 ton – 1.5 ton – 1.8 ton – 2 ton – 2.5 ton – 3 ton | Max. lifting height: 3 – 4.7 meter Renting a Lithium Forklift helps protect the environment, save energy and increase your work productivity by quick charging. Capacity: 1 ton – 1.5 ton – 2 ton – 2.5 ton – 3 ton | Max. lifting height 3 – 6 meter One customer is checking NISHIO Reach Truck inside a warehouse. Capacity 1.6 ton | Max. lifting height 4.5 meter Capacity: 2 ton Capacity: 1.8 ton Capacity: 2.5 ton 3 ton | Max. lifting height 2 meter GS1930 (7.79m max. working height) GS1932 (7.85m max. working height) GS2032 (7.92m max. working height) GS2046 (8.10m max. working height) GS2632 (9.80m max. working height) GS2646 (9.80m max. working height) GS3246 (11.75m max. working height) GS4047 (13.94m max. working height) GS1932m E-Drive (7.55m max. working height) GS1930 E-Drive (7.85m max.working height) GS2646 E-Drive (9.96m max. working height) GS3246 E-Drive (11.78m max. working height) GS4046 E-Drive (13.94m max. working height) GS4655 E-Drive (15.95m max. working height) GS5390 (18.15m max. working height) 1939ES (7.72m max. working height) SJ3219 (7.79m max. working height) SJ4732 (11.65m max. working height) Z33/18DC (12m max. working height) Z45/25DC (15.87m max. working height) Z60/37 DC (20.16m max. working height) Z34/22IC (12.54m max. working height) Z45/25 (15.86m max. working height) Z60/34 (20.39m max. working height) Z62/40 (20.87m max. working height) Z80/60 (25.77m max. working height) Z80/60 (25.77m max. working height) Z135/70 (42.15m max. working height) S65 (21.81m max. working height) S65 Trax (9.76m max. working height) S80 (26.38m max. working height) S85 (27.90m max. working height) S-85 XC (27.91m max. working height) S100 (32.48m max. working height) S125 (40.15m max. working height) SX150 (48.33m max. working height) 860SJ (28.21m max. working height) AWP40S (14.3m max. working height) SJ12 (5.65m max. working height) QU13 (13.7m max. working height) QU14 (14.3m max. working height) STAR10 (10 m max. working height, 3m Horizontal outreach, 345° Turntable rotation) For more detailed information such as maximum load, working time of the machine, machine size… You can view and download the catalog here, or contact us to get direct support. It depends on your project location, quantity and rental term. Please send us more information to get an exactly quotation!     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

We have updated more stock of Genie Scissor Lift GS1930 E-Drive (8m working height)!

Some specifications of GS1930 E-Drive Max.Platform height: 6 meter Max.Working height: 8 meter Safe working load: 227kg Motor: AC E-Drive WHY GENIE® AC E-DRIVE? Genie Scissor Lift E-Drive are engineered with today’s state-of-the art AC drive system that changes the way you think about scissor lifts’ profitability. How?  35% MAINTENANCE COST SAVINGS 30% INCREASE IN RUNTIME AND EFFICIENCY 70% FEWER HOSES AND FITTINGS GS1930 E-Drive is available in Hanoi, Hai Phong, Hue, Da Nang, Quang Ngai, Nha Trang, HCM, Vung Tau, Dong Nai, ect. Our biggest fleet in Vietnam can serve you everywhere! CONTACT US     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Things you need to know when using the Scissor Lift on a slope

We all know that using a scissor lift on a slope is very dangerous. But, some scissor lifts can be used on an incline. In this case, it may be safe to use them on a slope — as long as you don’t exceed the scissor lift’s maximum working angle. The max working angle may be listed on a scissor lift’s ID plate. Or, it may be marked by a decal on the platform. You can always find it in the operator’s manual, too. And if your scissor lift is not rated for an angle, it should only be used on firm, level ground.   A sloping sites Before using a scissor lift on a slope, inspect your worksite for any other hazards besides the slope. Other safety tips include: ✓ Read the operator’s manual and follow all guidelines for driving or working on slopes. ✓ Never raise or extend the platform unless the lift is on a firm, level surface. ✓ Don’t drive on a slope unless you know the angle. ✓ Limit the speed according to the surface traction of the slope. ✓ Never exceed the maximum slope rating for the lift. ✓ Plan for extra braking distance on slick or unstable surfaces. ✓ Never use a driver who has not been trained on how to use a scissor lift on a slope.   Nishio’s Genie brand Scissor Lift The Outriggers and Wheel stops can improve safety with a scissor lift, especially when we park or work on inclines. The purpose is keep the level, increased stability and a reduced risk for a tip-over. You can add outrigger boards under the outrigger to keep the level and increase stability further. Another purpose of the outriggers is to allow the scissor lift to carry a heavier load safely. Wheel stops NISHIO prepares wheel stops when we keep machine at our warehouse Some scissor lift with Outriggers Finally, you are still worry about using scissor lift on sloping site, please do not hesitate to contact us! Related AWP news： Things you need to know when using a Boom Lift on a slope The NEW scissor lift for rent: GS1932m E-Drive (Slab Scissor Lifts) New Genie 14m GS4655 is now available in Vietnam!       Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Forklift and AWP equipment for rent in Quoc Oai-Thach That-Hoa Lac and around the Hanoi areas

With a location adjacent to the inner city of Hanoi, Thach That Quoc Oai Industrial Zone and especially Hoa Lac Hi-Tech Park are currently developing many leading key investment projects. Therefore, the need to rent construction and industrial equipment is highly increasing, including Material Handling/Lifting equipment and Arial Working Platforms. Address: Lot CN3*, Thach That – Quoc Oai Industrial Park, Phung Xa ward, Thach That district, Hanoi city. Phone: 02433940471 or 02513683224   Our headquarters is located inside Thach That-Quoc Oai Industrial Zone, which is very convenient for transportation equipment to neighboring areas, this greatly reduces transportation costs for you. We provide a variety of Forklift types from diesel forklifts, battery forklifts, reach trucks … The number of equipment at NISHIO Hanoi is the largest among NISHIO’s branches in Vietnam. You can easily find the type of equipment that suits your needs. Prompt delivery: Fastest delivery on the same day that we receive your inquiry. The machine will be maintained by our high-skill mechanic team.  (For your reference: GENIE annual AWP technical training at NISHIO) Japanese quality service. No.12 in the rental equipment companies global ranking. Our machine is always in a good condition that adapt safety standards. Almost machine are imported from the famous brands such as Toyota, Mitsubishi,.. We also update the new models in every year. We especially encourage your business to use our long-term rental service, which can help you to reduce your initial investing cost, maintenance fee and other fees. Capacity: 1 ton – 1.5 ton – 2.5 ton – 3 ton – 4 ton – 6 ton – 10 ton | Max. lifting height: 3 – 5 meter NISHIO rental TOYOTA Diesel Forklift in a factory Capacity: 1 ton – 1.5 ton – 1.8 ton – 2 ton – 2.5 ton – 3 ton | Max. lifting height: 3 – 4.7 meter Renting a Lithium Forklift helps protect the environment, save energy and increase your work productivity by quick charging. Capacity: 1 ton – 1.5 ton – 2 ton – 2.5 ton – 3 ton | Max. lifting height 3 – 6 meter One customer is checking NISHIO Reach Truck inside a warehouse. Capacity 1.6 ton | Max. lifting height 4.5 meter Capacity: 2 ton Capacity: 1.8 ton Capacity: 2.5 ton 3 ton | Max. lifting height 2 meter GS1930 (7.79m max. working height) GS1932 (7.85m max. working height) GS2032 (7.92m max. working height) GS2046 (8.10m max. working height) GS2632 (9.80m max. working height) GS2646 (9.80m max. working height) GS3246 (11.75m max. working height) GS4047 (13.94m max. working height) GS1932m E-Drive (7.55m max. working height) GS1930 E-Drive (7.85m max.working height) GS2646 E-Drive (9.96m max. working height) GS3246 E-Drive (11.78m max. working height) GS4046 E-Drive (13.94m max. working height) GS4655 E-Drive (15.95m max. working height) GS5390 (18.15m max. working height) 1939ES (7.72m max. working height) SJ3219 (7.79m max. working height) SJ4732 (11.65m max. working height) Z33/18DC (12m max. working height) Z45/25DC (15.87m max. working height) Z60/37 DC (20.16m max. working height) Z34/22IC (12.54m max. working height) Z45/25 (15.86m max. working height) Z60/34 (20.39m max. working height) Z62/40 (20.87m max. working height) Z80/60 (25.77m max. working height) Z80/60 (25.77m max. working height) Z135/70 (42.15m max. working height) S65 (21.81m max. working height) S65 Trax (9.76m max. working height) S80 (26.38m max. working height) S85 (27.90m max. working height) S-85 XC (27.91m max. working height) S100 (32.48m max. working height) S125 (40.15m max. working height) SX150 (48.33m max. working height) 860SJ (28.21m max. working height) AWP40S (14.3m max. working height) SJ12 (5.65m max. working height) QU13 (13.7m max. working height) QU14 (14.3m max. working height) STAR10 (10 m max. working height, 3m Horizontal outreach, 345° Turntable rotation) For more detailed information such as maximum load, working time of the machine, machine size… You can view and download the catalog here, or contact us to get direct support. It depends on your project location, quantity and rental term. Please send us more information to get an exactly quotation!     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Arial Work Platform equipment for rent in Thu Duc (District 9) – HCMC (Saigon) area

Boom lifts are widely used for outdoor construction areas requiring a working height of over 12 meters. Meanwhile, Scissor lifts will be used when the working height is 7.5~18 meters. Both have Electric (Battery) and Engine (Diesel) models. In addition, NISHIO also rental other types of AWP equipment that you can refer HERE. Or refer to list of our all rental equipment. Photo: BM Windows Company rented Boom lifts and many other equipment from NISHIO to carry out the TTI factory construction project (Saigon High-Tech Park) Thu Duc – HCM city is the areas with the most modern construction projects, factories and buildings in Vietnam. Therefore, construction companies and foreign-invested factories have very high and strict requirements on the safety of equipment. NISHIO is proud to always receive trust and choice from customers and partners. We commit to prepare machine in a good condition and do free maintenance for long term rental contract. Some photos of projects in Thu Duc (Dist.9) – HCM city Project: Maintenance work at Vivian building – Sai Gon Hightech Park If you need to RENT AWP EQUIPMENT or rent other NISHIO’s equipment in District 9 – Thu Duc city – HCM city area, please call to our Hotline number below or leave your contact information here. We will quickly respond and send a quotation to you.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

LIST OF SCISSOR LIFT MODELS FOR RENT IN VIETNAM (UPDATED TO 2024/1)

NISHIO RENT ALL VIETNAM CO.,LTD. mainly imports Scissor Lifts directly from three famous brands: Genie, SkyJack and Haulotte. Please refer information as below. GS1930 (7.79m working height) – Safe working load: 227kg GS1932 (7.85m working height) – Safe working load: 227kg GS2032 (7.92m working height) – Safe working load: 353kg GS2046 (8.10m working height) – Safe working load: 544kg GS2632 (9.80m working height) – Safe working load: 227kg GS2646 (9.80m working height) – Safe working load: 454kg GS3246 (11.75m working height) – Safe working load: 318kg GS4047 (13.94m working height) – Safe working load: 350kg We have updated and supplied a big quantity of Genie E-Drive Scissor Lifts to customers in the Vietnam market. This is the new and most modern Electric Scissor Lift lineup from Genie, using an AC motor instead of a Hydraulic motor or DC motor like the previous scissor models. GS1932m E-Drive (7.55m working height) – Safe working load: 227kg GS1930 E-Drive (7.85m working height) – Safe working load: 227kg GS2646 E-Drive (9.96m working height) – Safe working load: 454kg GS3246 E-Drive (11.78m working height) – Safe working load: 318kg GS4046 E-Drive (13.94m working height) – Safe working load: 350kg GS4655 E-Drive (15.95m working height) – Safe working load: 350kg WHY GENIE® AC E-DRIVE? 35% MAINTENANCE COST SAVINGS 30% INCREASE IN RUNTIME AND EFFICIENCY 70% FEWER HOSES AND FITTINGS GS5390 (18.15m working height) – Safe working load: 9,100kg SJ3219 (7.79m working height) – Safe working load: 227kg SJ4732 (11.65m working height) – Safe working load: 318kg If you need to check more specifications, please check it here If you want to receive our rental quotation, please contact us by the below button and hotline, or our chat box beside.     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

NISHIO is continuously supplying more Genie XC Boom Lifts to the Vietnam market

NISHIO VIETNAM has imported a large quantity of  Genie “XC” Boom lifts. All of these Boom lifts are available in Vietnam and ready for rent! When you see the character “XC” beside the model name, then you know it’s an XC Boom lift! XC here means “Xtra Capacity” Responding to customer demand worldwide for aerial work platforms to handle heavy lifting, Genie Xtra Capacity (XC) boom lifts are designed to work in more applications that require a higher lift capacity. When you need a high-lift machine on the jobsite, platform capacity matters. Standard-capacity boom lifts can’t exceed 500 lb (227 kg). Meanwhile, all Genie XC™ boom lifts have dual lift capacity to provide an unrestricted platform capacity of 660 lb (300 kg) and a restricted capacity of 1,000 lb (454 kg). This reduces the number of lift cycles and the amount of equipment needed to get tools and materials to aerial worksites — doing more with a single unit saves time and increases productivity. In addition to increased platform weight capacity, all Genie Xtra Capacity lifts feature: Room for up to three people on the platform Simple, zero-load field calibration Load Sense Technology: The boom won’t lift if the maximum load is exceeded The Genie XC interactive tool lets you virtually place materials, attachments and operators in and on a virtual boom platform; then it automatically calculates the load weight. If the weight of what you’ve added to the platform is under the boom lift’s rated capacity, the load will rise — but if you’ve exceeded its capacity, the load will stay on the ground. The interactive tool experience shows you how industry-mandated platform load-sensing technology works in the real world: It disables the boom lift if the load weight is above its rated capacity. If the load weight is below that rated capacity, the virtual boom lift will work within its operating envelope. CLICK HERE TO TRY THE GENIE XC INTERACTIVE Max Working Height 27.91 m Max Horizontal Reach S-85 XC: 22.71 m Below Ground Reach 2.64 m Platform Capacity 300 kg Unrestricted, 454 kg Restricted Machine Width and Length 2.49 m, 12.37 m Download catalogue Max Working Height 40.10 m Max Horizontal Reach 24.38 m Below Ground Reach 2.69 m Platform Capacity 300 kg Unrestricted, 454 kg Restricted Machine Width and Length Width: 2.49 m – 3.94 m | Length: 14.25 m Download catalogue Max Working Height 43.15 m Max Horizontal Reach 27.43 m Below Ground Reach 6.00 m Platform Capacity 300 kg Unrestricted, 454 kg Restricted Machine Width and Length Width: 2.49 m – 3.94 m | Length: 19.76 m Download catalogue Note: Some specifications in the catalog such as machine size, wheel size... can be different with real depending on the year of manufacture.   Genie S-85 XC: Contact us for more information!     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

We have updated more stock of Genie Scissor Lift GS1930 E-Drive (8m working height)!

Some specifications of GS1930 E-Drive Max.Platform height: 6 meter Max.Working height: 8 meter Safe working load: 227kg Motor: AC E-Drive WHY GENIE® AC E-DRIVE? Genie Scissor Lift E-Drive are engineered with today’s state-of-the art AC drive system that changes the way you think about scissor lifts’ profitability. How?  35% MAINTENANCE COST SAVINGS 30% INCREASE IN RUNTIME AND EFFICIENCY 70% FEWER HOSES AND FITTINGS GS1930 E-Drive is available in Hanoi, Hai Phong, Hue, Da Nang, Quang Ngai, Nha Trang, HCM, Vung Tau, Dong Nai, ect. Our biggest fleet in Vietnam can serve you everywhere! CONTACT US     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

The annual AWP technical training of GENIE at NISHIO

This past week, the famous AWP manufacturer – GENIE, visited and organized annual technical training for NISHIO Mechanics. Genie is an American brand established since 1961. This brand is known as one of the leading manufacturers and suppliers of AWPs in the world. Genie has affirmed its position in the Vietnamese market with its excellent payload capacity and durable working capacity. They constantly updates the most modern and advanced technologies to produce new models of AWPs every year. Nishio Group has been one of Genie’s strategic partners globally for decades. Therefore, GENIE is always enthusiastic and ready to support us, as well as directly visit and train Nishio’s staff. We hope to always cooperate with Genie and develop comprehensively reputable and good quality AWPs products in Vietnam. [CONTACT US for more information about AWP]     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

The NEW model Scissor Lift for rent: GS1932m E-Drive (Slab Scissor Lifts)

  ⁙ Micro-size ideal for low-level installation and maintenance jobs in tight spaces  ⁙ Zero inside turning radius ⁙ Powerful AC electric drive motors for unmatched driving performance and industry-leading runtime per battery charge ⁙ Low weight 2,600 lb (1,179 kg), ideal for work on sensitive floors ⁙ 500 lb (227 kg) max lift capacity indoors and outdoors ⁙ Fits through a doorway with fixed rails Max Working Height 24 ft 2 in | 7.55 m Platform Capacity 500 lb | 227 kg Machine Width 32 in | 0.81 m Machine Length 4 ft 7 in | 1.40 m Weight 2,600 | 1,179 kg ⁙ Lighter and smaller to 20% compare with other scissors lift in the market ⁙ Save to 35% maintenance fee by the AC E-Drive which less effect on battery and accessory     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Z33/18, the latest equipment in the Boom Lift series. More products, more flexible options for our customers.

In early October 2016, NISHIO Rent All Vietnam officially introduced the Z33/18 model of the boom scissor lift series. This addition provides customers with more options for their lifting needs. Specifications: Model: Z33/18 Maximum working height: 12m Load capacity: 200kg Power source: Battery-powered     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.

Nishio’s Boomlift moves to Quang Binh for King Kong- Skull Island

Kong-Skull Island crew always believed and choose Nishio is the main supplier for equipment which supported for the film Nishio Boomlift always be appreciated by the high quality and good design. Nishio’s Boomlift on the way go to Quang Binh In addition, services of Nishio also always appreciated by the enthusiastic and experienced mechanic The crew members are also very friendly with Nishio’s staff     Submit Rating   / 5. Vote count: No votes so far! Be the first to rate this post.